Fuel pressure regulator in odd spot...?

[TBCobra]

Looking at buying this cobra and noticed the fpr in what looks like a different than stock place. Anyone know why they would do that? Anything I should be concerned about?

Thanks!

 

[toddyfiveo]

The fuel rail pressure sensor is in the correct spot. The part I believe you are referring to looks like a fuel sensor for an aftermarket gauge.


Sent from my iPhone using svtperformance.com

 

[MG0h3]

Hard to tell from the pictures but is that even a regulator? Looks like an old school sending unit with a wire coming off the top.

Sweet install with the zipties.......

But typically, that means you have a return style fuel system as there is no need for a regulator like that with the factory returnless setup.

 

[TBCobra]

The fuel rail pressure sensor is in the correct spot. The part I believe you are referring to looks like a fuel sensor for an aftermarket gauge.

It looked like the fuel pressure regulator not the sensor. The car does have two aftermarket gauges, one was boost but don't remember the other. The car has the stock blower/pulley. Is it common to do a return style system on a basically stock car?

Edit: the other gauge is a fuel gauge and it's in that ugly pod above the air vents. How would I go about removing the added fuel sensor?


Sent from my iPhone using svtperformance.com

 

[03' White Snake]

Looks like a sending unit for a fuel rail pressure gauge. https://www.summitracing.com/parts/...MIs9aYs4_H3AIVVoezCh0OUAMQEAQYBiABEgKgNvD_BwE