Can anyone confirm If 315/35/20 on 11" 55 offset will not rub, only lowered about 1" on eibach pro kit
Thanks a lot people!
So basically my offset options for a good fit are from 35-41mm front, 54-60mm rear?
I'm looking for more of a fat look on the back. My car is lowered on coilovers (not sure exactly how much so i will post a photo). So yes I'm looking for the more aggressive look.
Since super deep are not an option, I'm debating between going semi-concave on the front and deep on the back, or just go deep all around. Im really digging the deeper look, but I dont know which one would look better for what I'm looking for. Since I only judge from online photos (Me and my car are overseas) its a very hard desicion, and not too many photos I can find of both set-ups. BTW, will the deep concave fit on a brembo car without any problem?
Damn what offsets?
@BornCoqui... Thanks for the pics with different sizes. I was wondering how different the deepness was between 9.5 and 10, because I was thinking about going 19x10 or 19x9.5 deep all around.
Can anyone confirm If 315/35/20 on 11" 55 offset will not rub, only lowered about 1" on eibach pro kit
x2
If someone can post pictures with the same tire, offset and wheel width that would fantastic.
Thalilbear02 stop showing your car, you're making me hate mine!
That size worksx2
If someone can post pictures with the same tire, offset and wheel width that would fantastic.
Thalilbear02 stop showing your car, you're making me hate mine!
Yes it will rub. That's what I had on my car before, but I was a lot lower than 1" that's the thing. With 11" ET55 on 315/35/20 which was EXACCTTTLLY what I had on my car, it rubs on the outside, and rubs the inside fender liner as well on the inside of the barrel of the wheel (though it wasn't that bad). Best fitment is that wheel and offset with a 305/35/20 if you can find it, or find a 295 that works for you, 315 will rub unless you modify the fenders, or don't lower it.
Lol sorry
I have 315/35/20's on 11" rears and am lowered am inch and no rubbing
Yes it will rub. That's what I had on my car before, but I was a lot lower than 1" that's the thing. With 11" ET55 on 315/35/20 which was EXACCTTTLLY what I had on my car, it rubs on the outside, and rubs the inside fender liner as well on the inside of the barrel of the wheel (though it wasn't that bad). Best fitment is that wheel and offset with a 305/35/20 if you can find it, or find a 295 that works for you, 315 will rub unless you modify the fenders, or don't lower it.
Lol sorry
sorry bout that. Posted a couple pics on the first page with info in my sig. No 100% sure on my offsets. Think offset are 35 & 55.What offset are your wheels, tire type and lower spring type?
I have 315/35/20's on 11" rears and am lowered am inch and no rubbing
What brand, type of tires did you have
It's an inch and half but doubt that 1/2" matters much when it comes to lowering. Every other discussion it's a huge amount. Lol, cracking myself up with my dirty old man mindI know... I'm lowered more than 1"
It's an inch and half but doubt that 1/2" matters much when it comes to lowering. Every other discussion it's a huge amount. Lol, cracking myself up with my dirty old man mind