FI setups and HP numbers

[SVTCOBRRA]

96 cobra 625rwhp on 20lbs only at 6k, 3.75 pulley 7.5 crank

 

[wojowojo16]

01 cobra with built motor, p1sc @ 11psi, 480HP 480tq at 6000rpm, forgot what size pulley.

 

[no_slow_svt]

01 cobra with built motor, p1sc @ 11psi, 480HP 480tq at 6000rpm, forgot what size pulley.

480/480?? u sure?
dont sound right for a centri.

 

[BLK_VNM]

i was wondering the same thing. i figured that the hp was about right but not torque....

 

[LS1PUSSOUT]

480/480?? u sure?
dont sound right for a centri.

Why not? Mine put 360hp/375tq last year. It makes all teh torque in the upper rpms instead of the lower.....

 

[Mach1Mustang]

04 mach 1
built motor, cams, d1sc. 14 psi(for now) 590 rwhp and 515 rwtq.

 

[no_slow_svt]

Why not? Mine put 360hp/375tq last year. It makes all teh torque in the upper rpms instead of the lower.....

well the hp may be fine but the tq seems high to me
unless he has some head and cam work done. the tq drops way off on the P1 head units when you get over or deep into the 400's+

i would think his numbers should be more like 490/440 or somthing.

either way those are great numbers for an 11 psi p1 set up.

J

 

[wojowojo16]

I have long tubes and a ported polished intake....it is what it is....

 

[97blksvt]

Stock motor 134k never touched inside, Novi2000 3.75 pulley. 9 psi, 463whp at 6300rpm and 397tq 5750rpm,and 6000rpm. This was 9psi tuner stoped it at 6300 due to wanting to get it back to me in one piece iam sure it puts over 500 down at 7k it was still climbing hard 93 pump gas no meth or fmic.

 

[y2k2gt]

2002 Gt
Built engine, ported 2v heads, Hps intake
Twin 60mm turbos
PA Super Comp C4
623/575@18psi

 

[no_slow_svt]

2002 Gt
Built engine, ported 2v heads, Hps intake
Twin 60mm turbos
PA Super Comp C4
623/575@18psi

awesome!!!:rockon:

 

[Sonic605hp]

10 lb vortech s trim......soon to be t trim 397rwhp no intercooler

 

[4.6 Rocket]

10 lb vortech s trim......soon to be t trim 397rwhp no intercooler

What kind of A/F is your car running? The only reason I ask is that those numbers sound a little low with 10lbs of boost. What does your torque look like?

 

[wojowojo16]

he probably has the timing backed down since it doesn't have an intercooler.

 

[Sonic605hp]

^^^exactly.......meth kit is going on VERY soon

 

[tjs98gt]

98 GT-built motor, ported heads, comp cams, 3.12 pulley on v1 t-trim with 14#s of boost non intercooler- 494rwhp/444rwtq

 

[SN8KBYTE]

what pulley are you using? and what is the dish on your pistons.

i ask cause that will be close to my new set up.

J

Not sure on the pulley size. I brought it to the shop and said "MORE BOOST". They threw on whatever would get me to 20psi. I believe it's smaller than 3". I think my pistons are 18cc. Ive got the build sheet somewhere. I'll post again when I find it.

 

[J's98Snake]

98 Cobra ported heads, V-1 @ 16 psi, meth, easy tune, 570 rwhp 504 rwtq

stock crank 3.0 upper

 

[no_slow_svt]

Not sure on the pulley size. I brought it to the shop and said "MORE BOOST". They threw on whatever would get me to 20psi. I believe it's smaller than 3". I think my pistons are 18cc. Ive got the build sheet somewhere. I'll post again when I find it.

cool im going to be running a 2.8 on my d1 and i hope to break the 600 rwhp also.:rockon:

 

[no_slow_svt]

list updated