FI setups and HP numbers

[no_slow_svt]

im sure there are a number of people coming into the blower bristo just wondering what kinda numbers people are putting down on different setups. also let us know what pulley size you are running too.



Ill start off
99 cobra D1sc procharger 2.8 pulley. 19.25psi 8 rib pulleys
577.67rwhp
529.24rwtq

here is a list of posts so far in order by hp

Blown02____TT 02 GT W/cobra heads___?lbs_______815rwhp
cmylxgo_________F1A 03 Mach________30lbs______804rwhp___4.0 pulley 7.425 crank
EvilTwins________HP Twins 03 cobra___19.5lbs_____794rwhp
no_slow_svt_____ THP TT 99 cobra_____17lbs_____738rwhp
tmm808 _________F1 01 cobra_________18lbs_____708rwhp
SonicSaleen______TT 03 cobra_________?lbs______690rwhp
bullett5094_______ vortec 01 bullitt_____16lbs_____657rwhp
Tommy25000@aol_Whipple 03 cobra_____19lbs_____657rwhp
spxxdy86________F1 04 cobra_________20lbs_____645rwhp
y2k2gt__________HP TT 02GT__________18lbs_____623rwhp
SN8KBYTE _______D1sc 99 cobra_______20lbs_____609rwhp
DROPTOPSNAKE01_ Vortec 01 cobra_____16lbs_____605rwhp
Mach1Mustang___ D1sc 04 Mach_______14lbs______590rwhp
no_slow_svt_____ D1sc 99 cobra_______19lbs______578rwhp
tampa03cobra____KB 03 Cobra_________16lbs______576rwhp
Sunburned_______Vortec T 98 cobra____16lbs______570rwhp
BLK VNM________ Whipple03 cobra_____19lbs______570/500
sc96cobra_______Vortec T 96 cobra____17lbs______570rwhp__3.0 pulley 5.4 crank
J's98Snake_______Vortec 98 cobra_____16lbs______570rwhp
99flblackcobra____D1sc 99 cobra_______15lbs______570rwhp
spyder1337______D1sc 98 cobra_______20lbs______535rwhp
prochargedcobra__P1sc 96 cobra_______12lbs______525rwhp
Wallie40_________Eaton 01 cobra______14lbs______525rwhp
drksniper________ D1sc 96 cobra_______12lbs_____ 525rwhp
SQ Stang_______Vortec 01 GT_________14lbs_____ 518rwhp
Astrodudepsu___Novi 2K 00GT__________14lbs_____514rwhp
Socom688______Vortec 96 cobra_______10lbs_____ 503rwhp
thump_rrr_______saleen s/c 05GT______12lbs______500rwhp
tjs98gt_________Vortec T 98 GT_______14lbs______494rwhp
wojowojo16______P1sc 01 cobra_______11lbs______490rwhp
98SaleenCobra____Vortec T 98 cobra____10lbs_____484rwhp
98KBCobraVert____Vortec T 98 cobra____10lbs_____480rwhp
01 Venom________Eaton 01 cobra______8lbs_______472rwhp
97blksvt_________Novi2000 97 cobra____9lbs______ 463rwhp 3.75 pulley
TTSTAN_________Vortec S 99 cobra____?lbs_______462rwhp
01greycobra_____ D1SC 01 cobra_______8lbs_______460rwhp
Kingcobra10sec___D1SC 01 cobra_______7lbs_______460rwhp
roush85_________Vortec S 01 cobra_____?lbs______ 452 rwhp
chip6990_________P1sc 96 GT__________10bs_______430rwhp
01rdcobra_______ P1sc 01 cobra________8lbs_______430rwhp
Scotty98________Vortec 98 cobra______ 8lbs_______426rwhp
sleepermobile_____Vortec 01 cobra______8lbs_______414rwhp
4.6 Rocket______ Vortec S 01 bullitt_____8psi______ 396rwhp
LS1Killer_________Vortec S 03 GT_______8psi_______360rwhp

 

[01rdcobra]

Before the rebuild motor
P1SC with 8psi pulley IC with power pipe
446hp/411tq

New motor is making 430hp/400tq
I need more boost!!!!

 

[99flblackcobra]

Built motor with a D-1sc at 15#s making around 570rwhp on mustang dyno.

New setup coming soon F-1A or F1R with more boost.

 

[LS1PUSSOUT]

Current setup.....03 GT
Vortech s-trim 8psi non-intercooled with powerpipe
360whp/375wtq:bowdown:

Hooking up intercooler when the couplers come in the mail this week.....

 

[4.6 Rocket]

01 Bullitt with a Vortech S-Trim 8psi non intercooled, midpipe, lightning mass air, and NGK TR6 plugs.
396rwhp/370rwtq

 

[97on22s]

id like to know what people are making with the f1a

im looking at doing hte f1a on my mach. but with built heads cam motor. and running around 16-18lbs and 20-22 rae gas.


anyone got numbers?

 

[roush85]

2001 cobra

stock motor
V2 Sq vortech w/ aftercooler
full exhaust
not sure the boost

452 Whp

 

[cmylxgo]

I have an F1A on my 5.0L Mach 1. With a 4.50" pulley I make 20lbs @ 7000rpm. I layed down 600rwhp through my automatic with a soggy breakin tune and ran 10.26 @ 132mph at 3850lbs on 17" Drag Radials. The 4.00" pulley makes 30lbs and I made 781 rwhp with it. I also have a 3.70" pulley and doing the math it should be worth another 110rwhp bringing the total to 890-900rwhp through an automatic.

-Corey

 

[NOXCUSES]

You guys have some nice numbers.

 

[no_slow_svt]

cool, its good to see people posting.
maybe we should add in what size pulley we use for the posted numbers
cause that seems to be the next most asked question.

 

[BLK_VNM]

built 96 cobra with a d1sc making 525rwhp and 470 rwtq at 12 lbs of boost

justin

 

[cmylxgo]

I have an F1A on my 5.0L Mach 1. With a 4.50" pulley I make 20lbs @ 7000rpm. I layed down 600rwhp through my automatic with a soggy breakin tune and ran 10.26 @ 132mph at 3850lbs on 17" Drag Radials. The 4.00" pulley makes 30lbs and I made 781 rwhp with it. I also have a 3.70" pulley and doing the math it should be worth another 110rwhp bringing the total to 890-900rwhp through an automatic.

-Corey

One thing that I forgot to mention...I am not running the stock 6.75" crank pulley...I am running a 7.425" crank.

-Corey

 

[SN8KBYTE]

608.8 rwhp, 506.4 tq. VT engine on 20#.

 

[no_slow_svt]

608.8 rwhp, 506.4 tq. VT engine on 20#.

what pulley are you using? and what is the dish on your pistons.

i ask cause that will be close to my new set up.

J

 

[snake bite 03]

I dont have the #'s yet but ill post the set up and what im lookin for HP wise.

2001 cobra stock bottom end ported lower, upper intake and TB. Meth injection P1SC intercooler Procharger lookin for 10PSI and 460 RWHP on the race tune and 400 and the street tune.

 

[tmm808]

Procharger F1 (not F1A)
708rwhp on 94 octane and 18lbs.
mods in sig.

 

[tmm808]

edit

 

[sc96cobra]

96 Cobra - Built bottom end, stock heads, cams, intake, methanol injection T-trim 3.0 pulley 5.4 crank pulley, 17 psi on dyno 570 with a semi conservative tune.

The turbo set has not been tuned yet.

 

[4.6 Rocket]

just keeping it alive

 

[Mach1Mustang]

590 rwhp and 515 rwtq with 14 lbs. camed and built motor. more to come.