Whats your guys thoughts on this?
I saw it at SEMA and looked pretty good....but WoW I was hoping for it to be a tad cheaper when it hit the market!
http://www.brothersperformance.com/...ml?year=2015&gclid=CNHjzv6dsckCFdgXgQodHk8Puw
* Makes 16+ More HP Than BOSS 302 Intake
* Perfect For Vehicles With Nitrous or Forced Induction
* Direct Bolt-On
* Reuses Stock Fuel Rails
* 1500-7500 RPM Power Band
Make Your Coyote Howl
Gain up to 16+ horsepower & 27+ ft-lbs of torque over the BOSS 302 intake manifold! This Edelbrock Victor II intake manifold is designed to fit all 2011-14 Mustang GT's & the 2015-16 Mustang GT's with the stock hood and most strut tower braces. The long tapered, crossover style runners combined with a large plenum allow your Coyote powered Ford to breathe and make big horsepower & torque. This simple bolt-on will take your 5.0L 4V engine to the next level.
Easy Bolt-On Installation
This 5.0L Victor II intake includes provisions for all emissions equipment and reuses the factory fuel rails for an easy installation. It also includes nitrous bosses which allow you to plumb a direct port nitrous system directly into the manifold. It will work with the factory throttle body, but works even better with a BBK or Ford Racing larger diameter throttle body. Reuses factory gaskets/seals.
Specifications
Manifold Height: Front 7.92"; Back 8.02"
Port Exit Dimensions: 2.24" x 1.30"
I saw it at SEMA and looked pretty good....but WoW I was hoping for it to be a tad cheaper when it hit the market!
http://www.brothersperformance.com/...ml?year=2015&gclid=CNHjzv6dsckCFdgXgQodHk8Puw
* Makes 16+ More HP Than BOSS 302 Intake
* Perfect For Vehicles With Nitrous or Forced Induction
* Direct Bolt-On
* Reuses Stock Fuel Rails
* 1500-7500 RPM Power Band
Make Your Coyote Howl
Gain up to 16+ horsepower & 27+ ft-lbs of torque over the BOSS 302 intake manifold! This Edelbrock Victor II intake manifold is designed to fit all 2011-14 Mustang GT's & the 2015-16 Mustang GT's with the stock hood and most strut tower braces. The long tapered, crossover style runners combined with a large plenum allow your Coyote powered Ford to breathe and make big horsepower & torque. This simple bolt-on will take your 5.0L 4V engine to the next level.
Easy Bolt-On Installation
This 5.0L Victor II intake includes provisions for all emissions equipment and reuses the factory fuel rails for an easy installation. It also includes nitrous bosses which allow you to plumb a direct port nitrous system directly into the manifold. It will work with the factory throttle body, but works even better with a BBK or Ford Racing larger diameter throttle body. Reuses factory gaskets/seals.
Specifications
Manifold Height: Front 7.92"; Back 8.02"
Port Exit Dimensions: 2.24" x 1.30"
Last edited: