I got it dyno tuned today at swanson performance, my old numbers were 417rwhp and 462 rwtq with 2.8 pulley, bassanni catted -x, mac 3" catback, straight shot intake with the canned predater tune,(note the low hp number) now the only change has been the steg stage iv w/ t.b and plenum port numbers are 460rwhp and 461 rwtq...im happy with the gains from the port roughly 43rwhp...but I have a boost drop problem at high rpm's, this problem was also existant before the steg port...when you nail the throttle, it shoots to 15psi...by 4500rpm, the boost starts falling off to 10psi @ around 6000rpm...i do have the steeda idler.. and the belt seems to be tight and no signs of belt-dust....is this a possible boost bypass issue??or a boost leak somewhere? im technically 4psi short at the top of the rpm range and i know the tune is good and solid- perfect 11.9 throughout the rpm band w/ no spikes, plugs are ngk tr6,..anyone have a similar issue or ideas???thanks