dyno

[04taxi]

Nothing to brag about but I just came back from Modual Depot and was 444rwhp and 442 rwtq. Mods were 2.90 RR pulley, tune, cold air, and mac 3inch catback.

 

[SLEEPERSTATUS]

Nothing to brag about but I just came back from Modual Depot and was 444rwhp and 442 rwtq. Mods were 2.90 RR pulley, tune, cold air, and mac 3inch catback.

Congrats!

 

[twhitey]

congrats

 

[unforgiven]

Nice, have fun and be safe

 

[SVT03Chris]

Good numbers man for a 2.9 upper Eaton.

 

[Jomo1994z71]

Very nice...congrats

 

[03cobra#694]

Cool:beer:

 

[Steve2050]

Pretty good for the mods. Was A/F safe?

 

[04taxi]

Thanks to all. it woke it up! I don't know much about a/f ratios but it showed 12 across the board. Is that too rich or just being safe? I hope that's ok, he said he kept it conservative and did not touch the rev limiter settings. It's got 8k on it. I'm not sure what the timing is at I will ask Dave at Modular Depot, Ken was out yesterday.
If I go w/ a 4# lower will I have to go w/ a BAP and/or injectors? a few yrs ago lots were doing upper and lowers now all the talk is ports/ twin screws and turbos, but it all COSTS!

 

[SVTDom]

as far as i no 12 AFR's are a little lean, ive never been around to much cobra tuning maybe thats good, but from what i know thats on the lean side.

 

[Ls1z28-00]

12 is ok as long he is running conservative timing. you can either run higher timing and 11.5 or so or 12 and run a little less timing. find out what the timing is.

 

[Pock]

Good numbers and let us know what your timing is.

 

[Silverboost]

you are fine with a 12:1 a/f ratio....good numbers!