Dyno Results:
Last week I added the FR-500 exhaust and this past weekend I added a set of Steeda Power Pulley's to my 01 Cobra. Today I made three dyno runs at JD's Performance Center in Huntingdon Valley, PA. The #'s were very impressive.
Bone stock w/ paper filter and silencer the car spun the wheels at 277 RWHP and 281Ft-lbs.
All three runs today were made with paper filter, silencer and 5 minute cool-downs between runs w/ NO ice. The #'s are SAE corrected.
Run1:
Temp: 97.9
Barometer: 29.72
Max Power: 294.2
Max Torque: 299.2
Run2:
Max Power: 294.1
Max Torque: 301.3
Run3:
:thumbsup:
Max Power: 295.2
Max Torque: 299.1
With only the FR-500 and pulleys I picked up 18RWHP and 20Ft-lbs, with no other mods. Joe the tuner at JD's thinks I will gain another 10-15RWHP with a custom chip. The car flat out hauls and is awesome to 6500.
For those looking at the FR-500 I admit it is quiet at normal speeds but at WOT this exhaust howls and makes some serious HP and torque.
Bill
:thumbsup:
Last week I added the FR-500 exhaust and this past weekend I added a set of Steeda Power Pulley's to my 01 Cobra. Today I made three dyno runs at JD's Performance Center in Huntingdon Valley, PA. The #'s were very impressive.
Bone stock w/ paper filter and silencer the car spun the wheels at 277 RWHP and 281Ft-lbs.
All three runs today were made with paper filter, silencer and 5 minute cool-downs between runs w/ NO ice. The #'s are SAE corrected.
Run1:
Temp: 97.9
Barometer: 29.72
Max Power: 294.2
Max Torque: 299.2
Run2:
Max Power: 294.1
Max Torque: 301.3
Run3:
:thumbsup:
Max Power: 295.2
Max Torque: 299.1
With only the FR-500 and pulleys I picked up 18RWHP and 20Ft-lbs, with no other mods. Joe the tuner at JD's thinks I will gain another 10-15RWHP with a custom chip. The car flat out hauls and is awesome to 6500.
For those looking at the FR-500 I admit it is quiet at normal speeds but at WOT this exhaust howls and makes some serious HP and torque.
Bill
:thumbsup: