So I have seen a bunch of questions on multiple threads about these lights....there was an awesome thread by "red351wcobra" that gave me the idea to do this step by step. I have the 5000k 35watt Hi/Lo DDM tuning HIDs as well. They are about 20 miles from my house so it was easy for me to go pick some up.
Here's what everything looks like when it's sent to you
Everything out of their packages. The Hi/Lo wiring kit, the two slim ballasts, and the two HID lights.
Take the plastic protective cap off
Unscrew the black front cap and this is how it will look...take that clear plastic piece off the right side
Put the piece from the headlights on the back side of the light and then screw the black front cap back on
Put the light in the housing and screw it to hold it in....this is what it will look like
Here is the harness....on the left is the driver side ballast clip, next to that is the wires that connect to the blue clip (which snaps into the stock connector on the driver's side), next is the passenger side ballast clip, next to that is the ground, and lastly on the far right is the power wire/fuse
With the blue connecting cap...this is how the wires should be hooked up if you get the hi/lo lights
I know most of you have the battery there....and I don't so I attached the power wire to the front side of the distribution area of my fuse box
I attached the ground to the other grounding cables on the driver's side near the headlight
Then I ran the passenger side ballast wire up and under near the radiator...that way it went directly over to the passenger side as well as stayed hidden
After this I mounted the hi/lo distributor...it made things easier mounting everything (making sure all the connectors would reach) and then doing the other wiring afterwards. I used 3M double sided tape and mounted it near where the headlight is
Next I mounted the two ballasts....the drivers side on the inner fender
And the passenger side
Now the mess after all the wires are connected and seperate...before cleaning things up
A look from the back once it's all cleaned up
A look from the front with it all cleaned up (looks like there is nothing changed from before starting)
The lights on and working
Hope this helps you guys who want to do this!
Here's what everything looks like when it's sent to you
Everything out of their packages. The Hi/Lo wiring kit, the two slim ballasts, and the two HID lights.
Take the plastic protective cap off
Unscrew the black front cap and this is how it will look...take that clear plastic piece off the right side
Put the piece from the headlights on the back side of the light and then screw the black front cap back on
Put the light in the housing and screw it to hold it in....this is what it will look like
Here is the harness....on the left is the driver side ballast clip, next to that is the wires that connect to the blue clip (which snaps into the stock connector on the driver's side), next is the passenger side ballast clip, next to that is the ground, and lastly on the far right is the power wire/fuse
With the blue connecting cap...this is how the wires should be hooked up if you get the hi/lo lights
I know most of you have the battery there....and I don't so I attached the power wire to the front side of the distribution area of my fuse box
I attached the ground to the other grounding cables on the driver's side near the headlight
Then I ran the passenger side ballast wire up and under near the radiator...that way it went directly over to the passenger side as well as stayed hidden
After this I mounted the hi/lo distributor...it made things easier mounting everything (making sure all the connectors would reach) and then doing the other wiring afterwards. I used 3M double sided tape and mounted it near where the headlight is
Next I mounted the two ballasts....the drivers side on the inner fender
And the passenger side
Now the mess after all the wires are connected and seperate...before cleaning things up
A look from the back once it's all cleaned up
A look from the front with it all cleaned up (looks like there is nothing changed from before starting)
The lights on and working
Hope this helps you guys who want to do this!