I need some help. I installed coil-overs on my car on tuesday at a friends house. Button everything up and drive it home, and now the car won't start. It just sits there and cranks. I checked the codes and it was throwing a P0193. This lead me to believe (after some research here) that it was the FPRS. I just replaced this and still nothing. Anyone got any ideas? My next thought is that is could be bad gas, but I really not sure how/if you can check for that. The downfall for this theory is that it has already run through half a tank of this fill up.
Mods are:
Posi race ported blower
Ported lower intake
60lb injectors
KB BAP
Dragon throttle body and inlet
CAI
Bigger MAF (can't remember the brand off the top of my head)
2.7 upper, 6lb lower
And now MM coil-overs
I have yet to take the plugs out and look at them. Might do this tonight or tomorrow. The car has been driving fine, but after I installed the coil-overs and drove it around the block, it did have a little trouble starting. If anyone has any ideas on what this could be please let me know. I really need to get this car driving again. Thanks
Mods are:
Posi race ported blower
Ported lower intake
60lb injectors
KB BAP
Dragon throttle body and inlet
CAI
Bigger MAF (can't remember the brand off the top of my head)
2.7 upper, 6lb lower
And now MM coil-overs
I have yet to take the plugs out and look at them. Might do this tonight or tomorrow. The car has been driving fine, but after I installed the coil-overs and drove it around the block, it did have a little trouble starting. If anyone has any ideas on what this could be please let me know. I really need to get this car driving again. Thanks