The old set up was fun. Made 1078 on 18lbs with the 7675 and t56. Stock sleeved, built motor.
new set up should be slightly faster. Power by the hour build auto, circle d converter, MPR sleeved motor, billet I beams and whatnot, and a t6 Borg with race cover. Would like 1200 or so thru the auto.
had a busy weekend getting stuff back together. we put the motor and trans back in the car Saturday morning/afternoon, so it was all down hill from there.
I had sent my double pump hat back in to Fore to have it converted to a triple, to support my goals and keep it safe. I had ben @ Fore put in a third walbro 465, so i should be covered for 1300+ on the fuel side.
i also decided to convert my dead-headed fuel rails to a true series set up, so I ordered fittings and did all that. now, it feeds from the pumps, to the back of the rails, then from the front of the rails, to the regulator.
I spent a good bit of time re-routing things under the hood to try to keep it as clean as possible, and hide as much as i could. this meant re-routing the rail feeds to the tunnel, which proved more difficult than i imagined just based on the damn fittings.
I also spent some time recessing the wiring on my slim fan assembly to make room for the up pipe and down pipe.
did some clever stuff with hiding boost references to my MAP sensor, and new pressure ports on the charged side off the turbo for gate pressure, all hidden of course. the goal was to take my time, and hide everything as much as I could.
as you can see, i powdercoated everything black as well. the coolant tank, breather tank where the battery sat, and the charge pipe really make it look nice.
new set up should be slightly faster. Power by the hour build auto, circle d converter, MPR sleeved motor, billet I beams and whatnot, and a t6 Borg with race cover. Would like 1200 or so thru the auto.
had a busy weekend getting stuff back together. we put the motor and trans back in the car Saturday morning/afternoon, so it was all down hill from there.
I had sent my double pump hat back in to Fore to have it converted to a triple, to support my goals and keep it safe. I had ben @ Fore put in a third walbro 465, so i should be covered for 1300+ on the fuel side.
i also decided to convert my dead-headed fuel rails to a true series set up, so I ordered fittings and did all that. now, it feeds from the pumps, to the back of the rails, then from the front of the rails, to the regulator.
I spent a good bit of time re-routing things under the hood to try to keep it as clean as possible, and hide as much as i could. this meant re-routing the rail feeds to the tunnel, which proved more difficult than i imagined just based on the damn fittings.
I also spent some time recessing the wiring on my slim fan assembly to make room for the up pipe and down pipe.
did some clever stuff with hiding boost references to my MAP sensor, and new pressure ports on the charged side off the turbo for gate pressure, all hidden of course. the goal was to take my time, and hide everything as much as I could.
as you can see, i powdercoated everything black as well. the coolant tank, breather tank where the battery sat, and the charge pipe really make it look nice.