Starting to do some finish work on the firewall but have to move the Master Cylinder over about an inch to clear the motor. First weld and strengthen the firewall by cutting out the old and making a new maounting plate and welding in. then modify the brake petal assembly under the dash
Had to make a new pin for the pedal
Got the motor back in to check clearance looks like it worked
While we were at it we checked clearance on the heater and A/C lines they look like they will work mow also
Modified this piece of square tubing to weld in for the removable top to the radiator support to strengthen it and make the motor go in and out easily with the trans connected
Well its been awhile had to stop on the mustang for a litle while but back at it now.Gonna try and get it ready for Mustang Week 2015 so here are some updated pics and will keep it going until its finished this time.
Radiator and air box fitting good
Getting some bodywork done on the hood
Man these hoods suck right out of the box going to be a lot of work
L E D side marker / turn lights for front going in they will be behind the paint / clear and smooth with the body