600 hp

[fastferndog]

What's up guys! I have basically stock 07 with 16k miles and a jlt intake and SCT tuner. What mods can I do to get near 600 HP to the wheels?
Thanks

 

[albaluma]

Go for 2.4 or 2.5 pulley
headers & x-pipe
throttle body 67mm or 65mm
afco dual fan heat exchanger

with a good tune you will be near 570 rwhp
for 600 hp I think you have to do a porting work for your supercharger.

 

[fastferndog]

Go for 2.4 or 2.5 pulley
headers & x-pipe
throttle body 67mm or 65mm
afco dual fan heat exchanger

with a good tune you will be near 570 rwhp
for 600 hp I think you have to do a porting work for your supercharger.

Wow! That's it! Thanks! Would the TVS upgrade work?

 

[NightRide]

Wow! That's it! Thanks! Would the TVS upgrade work?

Yes and be a much easier route to 600-650 whp.

 

[Stri8ed]

I have a TVS with stock pulley and a 113mm CAI and i got 615whp with no problem.

 

[Kenneth]

Do the TVS and be done with it.

BTW when I started modding this car 600/600 was my goal, That didn't last long.

 

[VNMOUS1]

What's up guys! I have basically stock 07 with 16k miles and a jlt intake and SCT tuner. What mods can I do to get near 600 HP to the wheels?
Thanks

You call me.

321 206-9369 x 112

Less than $2400 and you're at 600 with only one mod and can make 800 down the road.

Bj

 

[VNMOUS1]

do the tvs and be done with it.

Btw when i started modding this car 600/600 was my goal, that didn't last long.

+1

 

[07 Black Beauty]

I made 601rwhp/605rwtq w/ my set up, stock blower 2.7 upper, ATI 10% lower, Steeda 114 intake,FRPP twin 65 TB, ARH1 7/8 headers and a dyno tune. The TVS would've been easier to hit 600 rwhp but w/ all the supporting I have mods when I put a TVS on I should be over 700 rwhp.

 

[Kewlv8]

What's up guys! I have basically stock 07 with 16k miles and a jlt intake and SCT tuner. What mods can I do to get near 600 HP to the wheels?
Thanks

Just do a TVS and be done with it. Installation takes about 2 hours, and moves you up above the 2013 HP range. Sure, you can Frankenstien the heck out of the stock blower, but you end up overspinning a small blower which is not ideal.

 

[fastferndog]

Great info guys! I didn't realize these took mods so easy! Reminds me of the OG 5.0! Got to save up a bit then. I probably will take the TVS upgrade, and some sticky tires!!
Thanks everyone!

 

[fastferndog]

You call me.

321 206-9369 x 112

Less than $2400 and you're at 600 with only one mod and can make 800 down the road.

Bj

I deff will when I'm ready!! Thank you !!!

 

[fastferndog]

All you guys are bad ass! Thanks again!

 

[1320 Junkie]

Just installed a 2.4 Billet pro shop no slip pulley on a 13/14 Gt500 blower for a buddy and he made 637/601 corrected on a mustang dyno 673/637 actual hp. Stock headers no lower pulley. .very basic mods. Take off Trinity blowers can be had for $16-1800

 

[brian98svtsnake]

You can get a take off or slightly used TVS from a 13/14 GT500 for around 1800 shipped, just check the FS Forum.

 

[nxhappy]

Wow! That's it! Thanks! Would the TVS upgrade work?

TVS is the better option .

 

[brian98svtsnake]

For example, here's a 13 TVS for 1700 without the elbow.

http://www.svtperformance.com/forum...-80-injectors-fr-chrome-valve-covers-etc.html

 

[fastferndog]

I still can't believe they respond to mods that easy.
I've looked at the TVS but it has a 5.8 cast into it. Grinding it off will look very obvious. Do you guys know how to take the 5.8 off and have it blend in to appear nothing ever was there? Thanks again everyone!

 

[Stri8ed]

I still can't believe they respond to mods that easy.
I've looked at the TVS but it has a 5.8 cast into it. Grinding it off will look very obvious. Do you guys know how to take the 5.8 off and have it blend in to appear nothing ever was there? Thanks again everyone!

Billet Pro shop will grind it off and powder coat it for you. Read through the thread below and you will see what I mean.

http://www.svtperformance.com/forums/engine-drivetrain-282/971633-fs-new-2014-tvs-take-off.html

 

[Ninjak]

TVS and done. I put my on with zero issues while talking and taking my tea break.

I to was looking at "just" 600 WhP as well when I started...yeah....600 and I'm good ! Yeah...