Comp Cams 4v degreeing instructions:
http://www.compcams.com/Technical/Instructions/Files/COMP4-102.pdf
http://www.compcams.com/Technical/Instructions/Files/COMP4-102.pdf
Ciotti said:I remember reading an article in MM&FF a while back where they built up a B Headed 4 valve 4.6 and were amazed at how off the cam degreeing was between the right and left sides. If I remember correctly, they picked up a bunch of power by degreeing the cams correctly and they also said it's very important to do when building a motor up because if that is off between the banks, one side of the motor will make more power than the other... which is bad
Red98CobraStang said:this is why engines should only have one cam...