2013 OEM HID into 10-13 Non-HID Harness

[cobra1718]

Thanks to all you that have purchased, shared your pictures and experience. i sold my 25th harness now and hope to keep more of you guys happy!

Keep up the good work! Congrats and thanks for your product

 

[tuxedoblack11]

Keep up the good work! Congrats and thanks for your product

Thanks man, and yes I'll be making these for the long haul l, so if anyone is saving up ill be here.

 

[AnthonyNoz]

Thanks again bro that harness was unbelievable quality....worth every penny

 

[scott_0]

Thanks man, and yes I'll be making these for the long haul l, so if anyone is saving up ill be here.

that's great to hear, haha I'm hoping I can do this much much sooner, the $100, is that per side or for both sides?

 

[stang8psi]

that's for the whole harness (both sides)

 

[scott_0]

that's for the whole harness (both sides)

sweet thx! I'm actually looking now at doing this retrofit the first week of September

 

[2012GTCS]

Hmmm looking into this big time as well. Steep priced mod but worth it. Especially when I cheaped out on getting them from Ford in the first place on my 12.

So this harness will allow me to go from 2012 Halogen into 13 HID without hacking the hell out of wires?

 

[stang8psi]

correct

 

[implosive]

Man I can't wait to do this

 

[scott_0]

I got in contact with tuxedo through PM, he's selling me the entire setup and I can't wait! can't beat getting this setup all from one seller. so hopefully by the second week of September I'll be rocking this sick setup!

 

[xXBlacKrimsonXx]

Affordable 2010-2014 Mustang HID Wire harnesses

Finding the 2013+ HID lamps that dont have broken tabs will be hard to find, they do fit the 2010+ mustangs for they never changed much on mounting as for tail lamps you will need to change the rear bumper if you dont want a gap on the point of the 2010-2012 tail lights. The HID Headlights run about $200+ each used but for brand new or fairly new you're looking up to $1500 a pair or $750+ each.
beneath you will help yourself to the list of parts you will need to achieve the 2013+ hid conversion

here is the video of the harness hooked up and tested
2013 Mustang OEM HID Adapting Harness - YouTube

installation/review
2013 Mustang HID LED Adapting Harness Install - YouTube

2013 OEM Mustang HID LED to H13 Headlight Adapting Harness
this is the harness that you will need to convert any 2010+ mustang h13 halogen bulb to the 2013-2014 hid 16 pin harness

2013 OEM Mustang HID Turn Signal Adapting Harness
to change the 2010-2012, 3457 bulb to the new 2013-2014, 7444 bulb, you will also need this connection for your turn signal/daytime running light,

2010-2012 Mustang HID to 2013 Mustang HID Plug Kit
if you already have the 2010-2012 hid 4 pin harness you will need and want the new 16 pin 2013-2013 hid harness you will need this

2010-2012 OEM Mustang HID to H13 Headlight Adapting Harness
or if you just want the old 2010-2012 4 pin hid lights without the led bars but you have the h13 bulb you will need this harness

merry christmas

 

[VETTEHUNTER]

I installed these a while back but never got a chance to post up pics. Tux's Harness is awesome. The '13 lights transform the car. Expensive mod, but well worth it. I got the headlights used for $400 ea. Sorry for the shitty pics:

 

[StevenStarke]

I installed these a while back but never got a chance to post up pics. Tux's Harness is awesome. The '13 lights transform the car. Expensive mod, but well worth it. I got the headlights used for $400 ea. Sorry for the shitty pics:

if you bend one of the pins on each blinker harness, the parking lights will stay off when the LED's are on and only come on to blink. So it acts exactly like a 2013.

 

[VETTEHUNTER]

if you bend one of the pins on each blinker harness, the parking lights will stay off when the LED's are on and only come on to blink. So it acts exactly like a 2013.

Under normal operation, the LED's stay on and the parking lights off (check out the last pic).... Some of the pics I took were taken with the parking lights on.... No mods needed to the harness. :beer:

 

[scott_0]

damn I'm anxious to get mine, hopefully be installing next Friday!

 

[12mustang5.0]

What if i get a headlight with out hid ballast and bulb can we add another aftermarket hid set??
Or I have to get a complete housing

 

[scott_0]

I'd like to have my marker lights behind the leds stay off while the parking lights or headlights are on, anyone figure out how to do it yet. I have the switchbacks I got from tuxedoblack11 but when the parking lights or headlights are on, the marker lights are still on behind the led strips, I want the markers off unless they are flashing. I was thinking maybe one of the wires thay turns the marker bulb on could be disconnected..........

 

[scott_0]

What if i get a headlight with out hid ballast and bulb can we add another aftermarket hid set??
Or I have to get a complete housing

are you talking about retrofitting another projector into the housing? or do you simply want to get your own replacement bulb? you can get the same ballast off ebay, the bulb is D2S bulb

 

[tuxedoblack11]

I'd like to have my marker lights behind the leds stay off while the parking lights or headlights are on, anyone figure out how to do it yet. I have the switchbacks I got from tuxedoblack11 but when the parking lights or headlights are on, the marker lights are still on behind the led strips, I want the markers off unless they are flashing. I was thinking maybe one of the wires thay turns the marker bulb on could be disconnected..........

To disable the marker lamp from being on, simply cut the black wire on the 7444 bulb socket side.

 

[scott_0]

@tuxedoblack11 thanks sir! I'll do that