Redfire Terminator
Aprox---10,400 miles
Big Bore Boss Block
L&M 305 engine 9:1 compression 5.0 Boss Build, L&M Cams, 9:0 Compression, Ported Eaton
Custom L&M cams for 2.3 Liter blowers
Built 8.8 reared
80lb injectors
Built 4stbe from Freddy Brown Performance FB Performance built 4R70W swap (4STB-E))
Single Disc 4,500 stall with Transbrake
Custom 6 point Rollbar painted to Redfire with removable swing-outs
stock lines and rails
Twin GT pumps with BAP
True Forged Victorty wheels Chrome (needs new bolts but I have them) Was going to replace but just had wrist surgery
325/40 rears M&H
275/35 Michelin Sports that are shaved and need to be mounted fronts
Weld racing drag rears
Weld Front runners
Corbeau front seats
Stock rear seat
TVS blower
Stock heads
TeamZ ARB TeamZ Anti Rollbar - Page 3
Metco Upper and Lower control arms
QA1 rear double adjustable shocks
PA Racing K-member
1 5/8th's full length Kooks headers
Borla Cat-back (quiet can't remember part number)
Kooks x-pipe
5 gallon I/C resevoir mounted in trunk
Nano Nitrous that hasn't been ran on new motor
3.73 gears
Strange 33 spline axles C-clip eliminators
Cut front bumper supports going to headlights(was going to keep car forever:bash
Only 1/4 mile times this year 9.78@140+
LouisvilleMustangs.net - View Single Post - Decent video of my best pass...
Email for additional questions....
[email protected]
1-502-489-0136 (Brian)
$26,500
Clearance on bar for shoulders. Won't hit the door either.
Aprox---10,400 miles
Big Bore Boss Block
L&M 305 engine 9:1 compression 5.0 Boss Build, L&M Cams, 9:0 Compression, Ported Eaton
Custom L&M cams for 2.3 Liter blowers
Built 8.8 reared
80lb injectors
Built 4stbe from Freddy Brown Performance FB Performance built 4R70W swap (4STB-E))
Single Disc 4,500 stall with Transbrake
Custom 6 point Rollbar painted to Redfire with removable swing-outs
stock lines and rails
Twin GT pumps with BAP
True Forged Victorty wheels Chrome (needs new bolts but I have them) Was going to replace but just had wrist surgery
325/40 rears M&H
275/35 Michelin Sports that are shaved and need to be mounted fronts
Weld racing drag rears
Weld Front runners
Corbeau front seats
Stock rear seat
TVS blower
Stock heads
TeamZ ARB TeamZ Anti Rollbar - Page 3
Metco Upper and Lower control arms
QA1 rear double adjustable shocks
PA Racing K-member
1 5/8th's full length Kooks headers
Borla Cat-back (quiet can't remember part number)
Kooks x-pipe
5 gallon I/C resevoir mounted in trunk
Nano Nitrous that hasn't been ran on new motor
3.73 gears
Strange 33 spline axles C-clip eliminators
Cut front bumper supports going to headlights(was going to keep car forever:bash
Only 1/4 mile times this year 9.78@140+
LouisvilleMustangs.net - View Single Post - Decent video of my best pass...
Email for additional questions....
[email protected]
1-502-489-0136 (Brian)
$26,500
Clearance on bar for shoulders. Won't hit the door either.
Last edited: