After doing a bit of reserach it looks like the crusher upgrade is probably 50+WHP minimum gain. Guess I know what I need to do.
According to my research this particular inlet is supposed to reuse the stock throttle body. I would be using a accufab TB. From what I could gather gains on this inlet was in the 50whp range. I'm thinking this may be a good compromise rather then spending $2k for a full crusher setup.Like stated above make sure it's for a 3.4 and see what throttle body its built for. The whipple crusher and vmp gt500 t/b's are what you need.
And yes that intake would be a winner for you!
According to my research this particular inlet is supposed to reuse the stock throttle body. I would be using a accufab TB. From what I could gather gains on this inlet was in the 50whp range. I'm thinking this may be a good compromise rather then spending $2k for a full crusher setup.
I did read up on that a bit. Before I bolt the super charger back on I will make sure to visit that. Thanks for the heads up.I just got to thinking you might want to read up on boost dump valves. Once you add cams that can become a major issue and require blower removal to try to fix. I know Malcolm has some good information on it. Might save you some major headaches if you follow his advice.
Yeah I have used comp beehive springs when I did cams / springs in my 2v back in the mid 2000's and the same thing was being said back then. Seems like someone is always reporting bad springs / bad batches.Did Comp fix the spring breaking issue? I know it's been a couple years, but it seems most run PAC or Brian Tooley I think.
I will definitely have to hit him up and feel him out for some advice before I purchase a throttle body. Was leaning towards that crusher throttle bodyThe GT500 Throttlebody will bolt up and work on a crusher intake but its much smaller than the crusher TB. Malcolm was battling high idle issues on his crusher and tried a GT500 TB, it fit his car and cured his high idle issues. I believe he ran it until he got sick of the problems created by his 2.9 crusher and just went 2.3 TVS.