2003 Mustang Cobra black with parchment interior.(interior I would rate 9.5 out of 10)
Vin#1FAFP48Y23F406117
Build Date 03-13-2003
Build #5975 of 8394
Mileage: 85,000 and change
Motor Info:
Power adder VMP TVS 2.3 Gen 2 Blower with 3.0 pulley(less than 1,000 miles on blower)
.Siemens Deka 60lb Injectors
.EGR birdsnest deleted.
.Kenne Bell 40amp Boost-A-Pump
.Metco Motorsports 4lb lower, 90 millimeter Idler puller, and accesory pullies.(chrome)
.LFP head Cooling Mod
.Steeda X2 ball joints
.New OEM motor mounts
.Diablosport Mafia Mass Air Flow Calibrator
.Accufab single blade Oval Throttle Body
.Borla Stinger S-Type Cat-Back Exhaust with BBK catless X-pipe, Long Tube headers(unknown brand)
.Custom fabbed oil separator
.Steeda firewall adjuster
.LFP "COBRA" heat exchanger
.K&N CAI with heat shield
.Basically brand new Spec 3 Clutch,Flywheel and 26 spline input shaft with hardened input steel shaft retainer.
.New throw out bearing and Clutch release bearing.
Appearance mods:
.LFP Hood extractor vents
.Stainless steel rear bumper black inserts
.Gunmetal grey Rovos Durban Wheels (18x9 in front and 18x10.5 in rear)
.Tires Toyo proxes R888 in the front (275/35ZR18) Rear Toyo Proxes TQ (315/35R18)
.Calipers powder coated Gun metal grey and black on all four.
.Mach One Chin Splitter
.Carbon fiber layover side scoop inserts.
.Shortened antenna ( I think its roughly 12 inches or so)
.Dark window tint all the way around(Not too sure on the %)
.Car lowered approximately 1-1/2 inches with H&R race springs
.Smoked front headlights (HIDS for both headlights and fog lights)
.Powder coated valve covers, "terminator" steel radiator shroud"
.Canton Expansion tank and Supercharger coolant tank.
Interior info
.Speed of Sound gauge pod on A-pillar with Custom Speedhut boost and water temperature gauge.
.MGW shifter with orange handle and 2003 anniversary shifter boot.
.Aftermarket Cobra floormats (stock ones still in good shape and included).
.Pioneer touch screen double din DVD player.
.New door weather stripping and super clean parchment interior
A little about the car:
I have owned the car since 2009 and I believe I'm the 3rd owner. Car is accident free and has been a garage queen for the past 7 years or so. Paint is in good condition butdoes have a few not noticeable road chip blemishes here and there. I am super anal and refuse to even drive the car if it's not washed and detailed.I have never had the car to the track and I know the last owner had not either.
Horse power specs:
Car was dyno tuned by Sam at Coastal Chassis Dyno Tuning in Tampa Florida and put down 608 RWHP and 604 ft lbs TQ on a heat soaked 92 degree day (sheets available and video of dyno pull).
Car will come with my diablo programmer.The car runs liked a raped ape.
The reason for the sale is I'm finally considering starting something new. I Also have a toddler which takes up alot of time and I just don't give the car the time it deserves. This post will probably be edited multiple times as I'm sure I have forgotten multiple mods/details. The car currently has 84,000 miles and some change and was bought with 60,000 and change in 2009.
I am asking for $22,000. I would consider possible trades with the only thing having my interest now is a well built turbo notch but it would have
to be pretty clean. The car is located in Oldsmar Florida. At this time I'm simply gauging interests as I do not have to sell as the car for it has been paid off for sometime.
Thanks for looking! I'm responsive to PM'S and text messages (727)433-7096. I have a million More pictures upon request. If on Instagram I have a hell of alot more photos under the public name vnmous03.
Two videos to include Dyno Video.
Brandon Klaiber
Vin#1FAFP48Y23F406117
Build Date 03-13-2003
Build #5975 of 8394
Mileage: 85,000 and change
Motor Info:
Power adder VMP TVS 2.3 Gen 2 Blower with 3.0 pulley(less than 1,000 miles on blower)
.Siemens Deka 60lb Injectors
.EGR birdsnest deleted.
.Kenne Bell 40amp Boost-A-Pump
.Metco Motorsports 4lb lower, 90 millimeter Idler puller, and accesory pullies.(chrome)
.LFP head Cooling Mod
.Steeda X2 ball joints
.New OEM motor mounts
.Diablosport Mafia Mass Air Flow Calibrator
.Accufab single blade Oval Throttle Body
.Borla Stinger S-Type Cat-Back Exhaust with BBK catless X-pipe, Long Tube headers(unknown brand)
.Custom fabbed oil separator
.Steeda firewall adjuster
.LFP "COBRA" heat exchanger
.K&N CAI with heat shield
.Basically brand new Spec 3 Clutch,Flywheel and 26 spline input shaft with hardened input steel shaft retainer.
.New throw out bearing and Clutch release bearing.
Appearance mods:
.LFP Hood extractor vents
.Stainless steel rear bumper black inserts
.Gunmetal grey Rovos Durban Wheels (18x9 in front and 18x10.5 in rear)
.Tires Toyo proxes R888 in the front (275/35ZR18) Rear Toyo Proxes TQ (315/35R18)
.Calipers powder coated Gun metal grey and black on all four.
.Mach One Chin Splitter
.Carbon fiber layover side scoop inserts.
.Shortened antenna ( I think its roughly 12 inches or so)
.Dark window tint all the way around(Not too sure on the %)
.Car lowered approximately 1-1/2 inches with H&R race springs
.Smoked front headlights (HIDS for both headlights and fog lights)
.Powder coated valve covers, "terminator" steel radiator shroud"
.Canton Expansion tank and Supercharger coolant tank.
Interior info
.Speed of Sound gauge pod on A-pillar with Custom Speedhut boost and water temperature gauge.
.MGW shifter with orange handle and 2003 anniversary shifter boot.
.Aftermarket Cobra floormats (stock ones still in good shape and included).
.Pioneer touch screen double din DVD player.
.New door weather stripping and super clean parchment interior
A little about the car:
I have owned the car since 2009 and I believe I'm the 3rd owner. Car is accident free and has been a garage queen for the past 7 years or so. Paint is in good condition butdoes have a few not noticeable road chip blemishes here and there. I am super anal and refuse to even drive the car if it's not washed and detailed.I have never had the car to the track and I know the last owner had not either.
Horse power specs:
Car was dyno tuned by Sam at Coastal Chassis Dyno Tuning in Tampa Florida and put down 608 RWHP and 604 ft lbs TQ on a heat soaked 92 degree day (sheets available and video of dyno pull).
Car will come with my diablo programmer.The car runs liked a raped ape.
The reason for the sale is I'm finally considering starting something new. I Also have a toddler which takes up alot of time and I just don't give the car the time it deserves. This post will probably be edited multiple times as I'm sure I have forgotten multiple mods/details. The car currently has 84,000 miles and some change and was bought with 60,000 and change in 2009.
I am asking for $22,000. I would consider possible trades with the only thing having my interest now is a well built turbo notch but it would have
to be pretty clean. The car is located in Oldsmar Florida. At this time I'm simply gauging interests as I do not have to sell as the car for it has been paid off for sometime.
Thanks for looking! I'm responsive to PM'S and text messages (727)433-7096. I have a million More pictures upon request. If on Instagram I have a hell of alot more photos under the public name vnmous03.
Two videos to include Dyno Video.
Brandon Klaiber
Attachments
Last edited:
