Search results

“Made in America” has a specific meaning which historically has been assembled in the USA with a domestic component percentage above some threshold, which is informally 75%. It’s potentially misleading for sure if you expect only domestic components.

I have the BMR watts link and me and two friends installed it on jack stands in an afternoon. It’s not difficult, just a lot of bolts and adjustment. Nothing overly hard just need some patience.

If you recently unplugged any harness connections, you should check them first. I have had codes like this show up also from a pinched harness because I installed something and pulled the harness a bit more than I should have (I chased gremlins for 6 months after my KB3.6 install). The EGR is...

Yes learn shell and scripting. For the OP, who is just getting started, he probably just wants to focus on bare bones basics. If you are starting at ground zero, pick up one of the many online intro to coding courses. If you jump right into a 4G (abstracted - java, C#) or 5G (interpreted and...

As others said, totally depends on what you want to do. Python, React and either C# or Java combined with some basic data structure, ReST, and data skills plus AWS or Azure can get you pretty much anywhere. But, if all you’re looking for is a static web site and have no dev skills then just do...

I had a chance to see this up close in Philly today and it’s gorgeous in person. The red is very similar to the old laser red on my ‘95 and photos do not do this justice. Count me in, which I’m surprised to say, after all my 840rwhp kb3.6 2011 should be enough right? No this is a beast, sexy...

Skinny stripes or no stripes at all on svtpp, they were also two tone vs the non svtpp stripes that were monotone.

I'm having the same issue since yesterday. I see no DTCs and my ABS light is not on, only the advancetrac lights. Hopefully turns out to be a simple sensor like yours, I have read about abs sensors, modules and even steering racks being replaced to resolve the problem. Sent from my iPhone...

I have ended up returning every preprinted part I've had from them. As I understand it there's two problems, one is that most color codes have several variations - in my case code UJ has about a dozen variations along the red - blue spectrum. Second is they use a different manufacturer for the...

They are very different shapes, I doubt they would swap without a lot of body work on the fenders.

They really look sharp on the blue. Great look!

What cams? What other bits did you change along with the cams? Sounds great!

Have your insurance company do the work, that's why you pay them. They will take your deductible, take care of you and then return your deductible when they recover the money from the other company. My dad was just in an accident where another party t-boned him and it took about a week from the...

Go to a local vinyl wrap or sign shop for the vinyl

This.

Flow goes from the towers into the reservoir.

The ARH axle backs are pretty good. I had them for a while and liked them. I got rid of them because at the time I was pissed off at my car and later learned the hard way it was the X causing the raspiness that I didn't like. Minimal drone. You will probably like the H better than the X, and...

I have two of the Graco nautaulis seats. When I got the first one they were around $400, seems like half that now. Of the eight or so car seats we've gone through, this has been the best one. I now have four of them between two cars. Rear facing in the mustang is ok, front passenger needs to...

Couple pics on my recent install. Took a couple hours. Easy. I had to drain coolant anyways, just make sure you don't get any shavings inside the coolant passages. Pull out the pressed in nipples. Drill and tap with 1/8 npt Needs some heat to get over the nipple on the degas bottle, but...

Talk to Van, he hooked me up.

Yeah you need a longer hose. The hose is fairly cheap. I went with the routing to the front and shorted myself a few inches so it's not routed quite how I'd like due to the same bypass inlet. Suggest you get a longer hose. Should be -8 an, summit carries it by the foot.

I'm a haggler, I'll admit that. Deep Italian roots lol. But never publicly. I don't understand the deep lowball. The art of the deal is both parties walk away feeling equally happy or unhappy. Don't try to get something for nothing.

This is on a 13-14 GT? Bill Tumas has a video showing how to do it and where to cut.

I have a 2011 with the SVTPP stock shocks and springs all around. I have driven it on 18+ hour drives from philly to the Florida panhandle area and never considered the ride overly harsh personally. It's all in your personal taste. Now the factory seats... different problem.

Still looking