Search results

Does anyone know if there's Cobra tailpipes made from oval tubing (example: Oval Exhaust Tubing)? I ask because I have 2.5" tailpipes on my car currently, and they always scrape on the roads around here where they run under the differential. Oval tubes would tuck up nicely and wouldn't always be...

New never opened, hub and hardware. For factory balancer/damper. $40 shipped.

Used tray in mint shape pulled from my 03 cobra w/ 80k miles. Comes with the nuts to attach the tray (4th nut is from your oil pickup). $30 shipped.

Brand new, just opened and installed in the block to check clearances. Standard size. Only marks on the bearings are from the bore gauge. Edit: SOLD

Brand new, came with the pistons I used to build my motor. Not sure what other pistons they'll work with but the dimensions can be looked up. I have no use for them, $30 shipped.

Girodisc (A1-011) 2-piece floating rotor set, fits Cobra/Mach 1/Bullit/Cobra R calipers. Comes with Performance Friction 97 compound racing pads (0412.97.16.44) for Cobra calipers and Hard Brakes titanium heat shield shims (D412). Pads are about 50% thickness. This set of pads and rotors were...

I ran my car at the local track last night, and my car fell on it's face on my last pass when I grabbed 3rd gear. Looked at the logs, and I was losing fuel pressure (about 15 psi drop) after roughly 6k RPM. Never been a problem before, but I was probably around 1/4 tank of gas or a little more...

I built an engine for my car last year. It included having the heads worked over with CNC porting and new valves and bronze guides. Car ran great until an intake valve seized in the guide and stuck open. Started tearing things back apart to see what happened. Turned out the valve guide was...

I have an idle problem that is very difficult for me to figure out. Car is an '03 Cobra with a Whipple Crusher, 80lb injectors/return system, and ported heads w/ Comp "stage 2" blower cams. I have the idle set at 750 rpm, and I'm assuming that isn't too low. While the car is idling, it has a...

I had these motor mounts in my car for maybe 3000 miles, max. I bought them from Blue Oval Industries, but they look exactly like any other brand of aftermarket polyurethane motor mounts you can get for these cars. The poly material is already coming apart, as in the pictures. The metal part is...

Anyone have a computer that they want to get rid of? I've spent days troubleshooting some weird issues with my car, and it keeps looking like a bad PCM. I'd like to pick up another one to try.

Got a really weird misfire issue with my car. It runs like complete crap at all rpms and loads, and it won't idle on it's own. I pulled the plugs and they're all wet with gas. I changed them all just to see what would happen, and nothing changed. I checked the frps and it don't have any gas...

Built a new motor for my car, and I had the heads completely worked over by Fox Lake. New guides, exhaust seats, valves, springs, CNC porting/chamber work, etc. Everything looked good, and the car runs great. Only problem is the driver's side head/header area makes a pretty annoying mechanical...

I had a crank "fixed" because the thrust bearing failed and melted on to the thrust surface of the crank. The first guy screwed it up, so I had to have it ground again to make it right. Now my crank endplay is about .010", which is a little on the high side for my tastes. Does anyone make...

No machine shop I talked to in Oklahoma has a torque plate for mod motors, nor did any of them know of someone who did. Anyone have some to rent or buy? I saw that MMR has rental available, but the shipping on those on top of rental cost will make it to the point where you may as well buy one.

I had a shop clean up my thrust surface on my crankshaft after I roasted the thrust bearing. I got it back and measured the gap between the thrust faces on the crank. I'm seeing a .0015" variance between the closest and furthest points, at opposite sides of the crank flange. It's hard to find...

I need some engine work done for my car (03 Cobra). Crank needs repair. Thrust bearing burned up and all the crank surfaces need checking and finishing. Are there any machine shops that anyone can recommend that do quality work? Any shops that are particularly good with mod motors? I haven't...

I'm looking for a Metco adapter hub that allows the use of the Metco lower kit on the ATI harmonic balancer (918036), and a stock sized Metco ring. Already have the balancer now. Thanks!

Got a bunch of brand new fuel system stuff leftover from a project. You can use just about all of it for a budget return fuel system build using the stock rails on a FRPS equipped car. All prices include shipping. You cover fees or gift. I have: Fragola 8000 series -6an hose 18ft $36 for the...

I have this black coating inside my radiator (Fluidyne) and it's not oily or anything like that. In fact it won't wipe off or anything, it's like black anodizing. The only thing that takes it off is acid mag wheel cleaner. I cleaned it once, put it back in and less than a year later it looks...

Looking for a stock 03-04 Cobra coolant crossover, let me know if you got one you want to sell. Thanks!

I ran Royal Purple 75-140 full synthetic gear oil in my rebuilt 03 Cobra differential since day one. The clutch packs did not last more than 5,000 miles before they burned up enough to easily turn the wheels in opposite directions by hand when the car is jacked up. I did not add friction...

I ran Royal Purple 75-140 full synthetic gear oil in my rebuilt 03 Cobra differential since day one. The clutch packs did not last more than 5,000 miles before they burned up enough to easily turn the wheels in opposite directions by hand when the car is jacked up. I did not add friction...

I'm rebuilding my transmission and things are a little worse than expected. The engagement teeth on 2nd and 3rd gear are shot, and the countershaft broke 4 drive lugs off the end (not sure how that happens considering it just drives 5th,6th, and reverse). I see most places that sell T56 parts...

Is there any larger intercooler tanks for our cars that are plastic like the OEM one? I hate the way the metal ones look and they seem like they'd conduct a lot of under hood heat into the coolant. My friend got a larger plastic intercooler tank on his GT500, I think it was a repurposed radiator...