Which aftermarket fuel rails can fit on a 2008 GT500 with the 2.8 Kenne bell Mammoth, blower elbow barely hits the stock fuel rails and I'm looking to install a return system with aftermarket fuel rails that fit under the big mammoth elbow. if some one have this set up please can you tell me the...
looking a take off 13-14 GT500 stock Blower for my 2008 GT 500, sorry but not interested on high price one. just looking to wake up more my 08. PM for offers, thanks
Now my car has 727 RWHP and a Gen 3 VMP blower and I'm using a quick change lower pulley and still have the stock lower pulley (the one with the bracket) sitting around....and this is just a feeler, since my car now has that power level and the aftermarket lower pulley is just being hold by...
Just upgraded my Gen 3 VMP blower on my 03 Cobra with the GT500 TB/VMP plenum and new JLT intake kit for the GT500 set up. and I just removed from my Cobra the next items:
-VMP Plenum for Acuffab Single blade TB = $250 (cost $319 at VMP)
-Acuffab Single blade TB used for 2-3 months= SOLD
-JLT...
Hi there I'm looking to upgrade the current Accufab TB on my 03 Cobra with the first generations of GEN 3 VMP 2.65 blower if some one have one at a little lower price compare to new ones let me know or some one on desire to make a trade and cash on top on my side and do a partial trade for my...
Would like to change from my Accufab TB/Elbow on my current Gen 3 VMP 2.65 on my 03 Cobra for a GT 500 TB /Elbow & looking for a good used kit.
I can also trade my current Accufab/elbow and cash on my end for the GT500 kit
when the IRS axle outter boots (towards the wheels) broke on my 03 Cobra I was not able to find a stock replacement boots only after a hard looking I found this ones at ebay and they were the closest to stock dimensions (same big and the small diameters but a little longer) I was able to find...
Sorry for title , I wanted to say what RWHP can be achieved using stock Fuel lines and stock fuel rails?
Any one running high horse power on a gen 2 using stock fuel lines & stock fuel rails with twin 255's walbros, SCT 2600mor 3000 MAF and 42,60 or 80lbs Fuel injectors?
Plan to upgrade some...
Start bouncing the idea to upgrade blower for my truck, I highly preferred a used 3.4 whipple but I will consider a 2.3
Not interested on highly priced used blower or those ones close to a brand new unit cost.
......UPDATE, AS OF 11/07/18 BLOWER IS SOLD!!!!!!! ......CLUTCH STILL AVAILABLE ........I have a post here just related to the clutch only, I wont keep track of this post any more , any interested on clutch PM Please or look on this section the post related to this clutch only. Thank you all...
SOLD SOLD!!!!! thanks to SVTP forum! a brand new & still packed on original box from factory a Clutch kit spec stage 3(+) with the low effort pedal version, bought this and never installed and now want to sell to get more funds for fuel system upgrades, I can get this clutch later.. disc is for...
Up for sale is my Race Red 2015 GT (SOLD)
Auto
Aftermarket wheels/tires
Steeda cold air intake
Resonator delete
Pypes Muffler
29K miles
Aftermarket wing
This car still does not see a programmer because under warranty
very reliable and ready to be driven anywhere
new asking price is 23,000 (cash...
2.3 Whipple 2nd Gen Low miles sell or trade for a 3.4 whipple
Would like to sell my 2.3 whipple still on car. The main reason is the common "craving for more power disease" wanting to upgrade to 3.4 Whipple now.
Blower still on car and on proper working conditions (only at 19 psi since in...
03 White Whipple Cobra $20.5K
Looking to sell my Oxford White Cobra with over 15K just on upgrades , asking $20.5k, for location , upgrades description and more pics please follow link below, car located SW Kansas. Car dyno it at Hennessy Ok. on a mustang dyno.
Absolutely don't have to...
Sold truck & don't need these items, these are a set of Hossier & Skinnies brand new never mounted, included on sale are a the adapter for skinnies ... Long traction bars are not include because just got sold , tires located SW Kansas 67846..I think I have lug nuts some where If found I will...
Selling a LFP 2300-2400 stall and valve body street mod, shift hard at mid and WOT and is ok under normal driving....out of my 2000 Lightning..low miles on both...asking $480 for both with shipping included..only within US Please don't low ballers, just consider that shipping it will be high...
FS/FT 00 fully built Lightning 2.6 KB, JLP Engine
SOLD
2000 Red 620 RWHP/680TQ Wichita Dyno at Wichita KS
2.6 Big Bore KB (17 psi), bought new back when new motor was installed
E85 tunes (2)
110 tune (1)
Big MAF 3000
SCT Programmer
JLP Stage 2 Cams (installed by JLP)
JLP Short Block...
FS 03 @ 20K Cobra,whipple 2.3 and over 15K invested,T56 mag,supension, fuel syst,ETC
Testing the water to see what is outhere!:
2003 Cobra 82K
Oxford white with black stripes
FR500 wheels black & polished lip (10.5 back-9 front)
All IRS bushing changed for upgraded Poly...
Ford racing...
Testing waters and don't have to sell, 2003 Cobra for sale mods as follows:
All upgrades below were installed brand new not used.
2.3 Whipple (new when installed)
Long tube headers
H pipes
Magnaflow mufflers (awesome sound)
Fore precision fuel rails
82Lbs Fuel injectors...
:??:Looking to buy a blower (vortech/procharger) or turbo set up for a 93-95 Ford Lightning GEN1:rockon: only, no incomplete kits, shoot a pm if you have one and want to sell on a fair price....:shrug:.
Complete kit for 94-95 SN 95 Mustangs, for pics follow link below
you will need to use your MAF, upgraded injectors, fuel pump and tune !
Mustang Intercooled Vortech V2 kit for 94-95 Cobra/GT
For serious questions call at 620 640 7618, bracket, idle tensioner, crank pulley, head unit is...
.For sale 94 Cobra fully built 331 stroker, forged, RHS heads, cams, Trick flow series R Upper/lower, MS1 Megasquirt and much more, invested over 16K on this car, this is asteal price, just ned to downsize on toys, this is a turn key car see link below for more info & pics:rockon:. please only...
Brand new never used pair of assembled (springs good for .600) Trick Flow engine heads still in the package for 302/351 SBF, includes guide plates & studs. :beer:
Got them for my 408 project for my GEN 1 but never got around and do it!:shrug:
now they are collecting dust and I would like to...