i have came a cross a set of custom cams that had less then 500 miles on them almost new but i dont know if the specs match my set up i have a 2.8 kb and a built 5.8 engine stock cams for now :(
the cam specs :
adv dur: 294 int/ 294 exh
[email protected] 252/ 252
lobe: 113
valve lift: 0.585
should i...
hello evreyone
just looking for some inputs on running a 9.5 CR
engine spec:
diamond 9.5to1 cr
carrillo h beem connecting rods
cobra jet crank
mmr billet oil pump
clivet bearings
arp hardware
supercharger :2.8 kennebell
whats the safest boost level to go with pump gas ?
thanks
i just finished installing my 2.8 kennebell
when i shut the engine off after the first start up i took of the TB to make some adjustments there is water inside the sc and the elbow nothing crazy but small amount mixed with oil i have checked the dip stick no water of any kind all oil inside...
hi
i got a good deal on a used 2.8 kb ..whats the max i can go with this blower ?
planning on going with 3.25 upper and lower 10%(pump gas) and 2.5 upper and 10% (race gas)
my car has a built motor so am good to go
am looking to go with a triple pump set up
i understand the fore supply a fc3 staged controller and a boost switch and you will have one primary pump (running full time) and 2 secondary pumps ( boost activated) i really dont know whats best
should i put aem 320 as primery and 2 465 walbro as...
i just fried my pa performance 130 amp alt and i decided to installed a new 2013 gt500 alternator..it fits without any problem and the car is up and running
but i don't know any thing about this alternator it looks for sure different from the inside than the old models
but am no expert on...
any one know where its located or have a diagram for it ..sorry i don't have the owners manual
that's way am asking
any help would be kindly appreciated
just curious if anyone tried doing this setup for a returnless fuel system ..kenne bell did 985 rwhp on a 2013 gt500 e85 with just a 20v bap and ID 2000 injectors and still they say the pump can take more
it will be great if you have 980rwhp car and still daily drive it without fuel system...
they say its bigger than the 07-12 gt500 and it will fit stock hat and no wiring upgrade needed but i don't know
i want a returnless fuel system that can handle 1000rwhp
anyone tried them yet ?
am going to do a twin turbo build soon..but is there any company's that makes a forward facing headers (front mounted turbos) the problem with me going with a hellion kit is that i have a th400 i don't think the mounting of the turbos will fit alongside the transmission+ i want to see what i...
like mentioned om the title
am having some problems with my fan it will only stay on the low speed it wont switch to high speed
it programed to switch at 200f but whin it reach that it will stay at low speed
any help would be kindly appreciated
any inputs on this pump
http://www.latemodelrestoration.com/item/BBK-1862/1999-00-Electric-Fuel-Pump-Kit-300-Lph
...am thinking of getting this pump and adding a boost a pump and a 8-in fuel line and stay return less
but I don't know how much hp it will take ?
any info on that pump will be...
hi
i just bought i used 3.4 whipple
am a noob in whipple sc this is my first time installing a whipple in my gt500 am used to kennebell superchargers and there by pass valve roting
but the issue with whipple i cant find a fitting in the by pass to rote the vacuum lines and also there is...
I have an eaton blower that been sitting in my garage for 5 years
decided to swap it back in and take out the 3.6 kb and sell it
what kind of oil do you guys use for a stock eaton blower ?
am about to order the qa1 front coilover kit but would like to know what dose it weigh compered to the stock socks and springs?
and what's the best spring rate for street use ?
thanks
I have installed full bolt ons to my 5.0(jlt intake..kooks headers and x and lund tune) and after downloading the tune the car started with no problem but after 5 minutes it started to jerk and shuts off it gave me
a(p0320,,p0344,,p0349,,p0390,,p0394,,p0365,,p0369) wtf !! first of I thught it...
hello
i did a dyno run yestrday but the fuel pressure is driving me crazy
with the sct live link data log it shows a solid 40 psi throw all the rpm range
but i did install a exturnal fuel pressure gauge and it shows 60 psi at wot
and the a/f ratio at 5500 rpm 10.5 !
i dont know...
am in the market for a new pump and am wandering if any one tride this ic pump
Lethal Performance GT500 Intercooler Pump Upgrade Kit - Intercooler Pump Upgrades - Cooling - 07-09 Shelby GT500
I know it flows way better than a stock pump
but
is it good for dd car?
dose it last longer...
I drove the car last night...stop to gas station filled it up with 91+ torco can(that's the only fuel we have+87) than I drove for about 15 minutes the check engine light turn up I plugged the sct to read dtc it gave me p0191(fuel rail pressure sensor) and the fuel smell was bad in side the...
hello everyone ..
my car has the division x fuel system with the twin 405 wlbro pump..since I install this fuel system I hated the car so much that I don't drive it on the street any more ..the issues is fuel pumps heats up,,idle going up and down ,,if the car at half a tank fuel pressure...
am not happy with my 3.6 it lags betwin the gears like if its a turbo..i talked to kenne bell they say that I didn't install the vacum correctly but they didn't say where to connect it to
I installed the vacum as if its a 2.8 kb
any thought's on how to solve this problem ?