Recent content by Pollardhimself

Sold!!!!! Mac Exhaust Tune 2.8 Pully SCT SF3 Wideband Installed and wired to SCT Spec Stage 3+ Clutch Spec Flywheel 26 Spline Input Shaft Hardened Throw-out Bearing Retainer Sleeve JLT Intake Lethal Head cooling mod Eibach pro-kit springs Caster Camber Plates Just Installed Detroit...

Where can I get the chrome exhaust slip on tips from? I have the mac catbacks and mine are old and pitted.

Sold

Accidentally cracked my spoilers brake light is there anywhere you can buy just the lens from?

Is there any reason I need to replace the two stocks hoses attached to each pump also? Here's my current mock up.

Differential Bushing Install question I've been installing a bunch of stuff, True-trac, PPRV, and a bushing kit and cant quite remember if this washer went with the rear differential Bushing mount.

Whats a good diff for daily driving that doesn't have clutches? Looking at the Toren T2R and the Truetrac. Also when installing do they work with the c-clips? Been awhile but I changed the diff in my fox 8.8, Anything different I need to do other than set the backlash? What shim kit do I need...

Can any body point me to a good write up on how to get to the rear differential cover to reseal it?

Replacing my headlights whats the best looking headlights style for the silver cobras. Pics would be nice!

Dragon Throttle Body Sold!

Is the intercooler reservoir cap the same as the radiator cap? Some how I open my hood and mines gone :shrug:. This look like the correct part# MOTORCRAFT Part # RS527 {#1W138101AA, F6DZ8100A, RS103}

Did some reading on whats the best method to fix the sticking throttle with hanging idle? Just had it tuned yesterday wasn't really aware of the issue till afterwards. Did some reading on this post http://www.svtperformance.com/forums/engine-tuning-214/868993-dragon-tb-driving-me-crazy.html...

Anyone know where I can get a replacement or aftermarket crossover fill plug? ford quit making them.

Got a issue installing my dragon throttle body and plenum, the iac is hitting the spark plug cover and the pcv value hose isn't long enough. Any idea's :shrug:

Just installed a dragon throttle-body and plenum about to get it tuned and considering adding a intake (JLT) before I take it up. Would it be worth it? What kind of HP gain should I see? Mods SLP Midpipe Mac Catback 2.8 pulley K&N Filter Pack Xcal3