Thanks for the help everyone. I had a Mustang/Ford wizard friend help me out and ebay supplied the part. Everything has worked great so far. 4 new O2 sensors and fixed wires solved every problem with the excecption of one reverse light. One is good enough. No CEL and it's running great. Thanks...
I pulled the trans and the harness today. Here is the result. Luckily, only the male side that connects to the trans harness was damaged. These are 16 slots and 9 pins coming out of them. On my motorcraft catalog, the female end seems to be a 16 cavity connector #WPT-326 or 3U2Z-14S411-JVA. Any...
I have a 2001 Cobra with some issues. Car has the standard 4.6 4v and tr3650 with no performance mods. I crushed the pigtail connector that connects the transmission wiring harness into the main engine harness while trying to reinstall the transmission. I have no reverse lights, speedo, odo...
Thank you! When I crushed it, it was connected to the plug in part at the main harness which is now also crushed. If that is bad, is just the connector available?
2001 Cobra
100000 mi
No drivetrain mods
I recently replaced a bad throw out bearing and in the process I made the rookie mistake of crushing the transmission wiring harness between the bellhousing and engine. The connector box is straight mangled. The car still shifts fine but my issues now are...
Hey I am here to resurect this old thread. My dash lights are not working and I keep blowing the related fuse after it works for a few minutes. I'm working on the g203 and g204 grounds. Ive found them but is there suppost to be a loop on the screw? One green screw has 2 wire loop things...
Hi, a few weeks ago you said you have an oil cooler for a 99 cobra for sale. Do you have the adaptor that the cooler attaches to to attach it to the block? I believe 99 and 01 are the same part. Thanks.
Hi, new member here. Car is a 2001 Cobra, 86,000 miles, no mods, great shape. I had the infamous erratic oil pressure gauge come up this weekend. Today I replaced the oil pressure sending unit (old was real bad) it worked great but I overtightened it and cracked (hairline) the oil cooler fitting...