Just thought I would share thatI finally took my coyote swap to the dyno. I have done all the work to the car myself. The specs are as follows:
Aluminator S/C
Magnum T-56
03 Cobra Built IRS with 4:10s
Procharger F1A blower 8 rib Belt slipping made about 13ish.
http://youtu.be/4KWj3gQltYs...
I'm just curious to see how may have had a leaking procharger. I just installed a F1A on my coyote swap notch and it started leaking in the driveway. I haven't even driven it yet... Not vey happy.
Well I went to the track last night with my $500 dyno tune in and couldnt get lower than a 12.90. I put in the 93 pulley tune from my predator and some 110 and ran a 12.83@106. I gave it a little more timing above 3500 rpm and went 12.75@107. All of my 60' times on all passes were between...
I just bought a 93 notchback 5.0. It was a texas highway patrol car. The car is in good shape needs some work. My question is I just ordered the m-2300-k brake kit from jegs and I want know if any of the fox guys run 03 cobra wheels on there cars? I just wanted to see if there are any issues...
I have a lower intake manifold, intercooler, supercharger,plenum,tb, wiring harness, fuel rail and the coolant rail that runs down the side of the blower for the intercooler. It is off of an 01 lightning. Thinking about putting it on ebay. How much do you think its worth??
I just finished installing my TCE brake kit. It was so easy. It only took 2 hours. The kit is very well thought out. The truck stops so much better now. The pedal feel is far better than stock. The front wheels stick out about a 1/4 inch more than before. I am very happy with it. Plus I saved...
I went to the track last night. I finally got a 12 second pass under my belt.
r/t .017
60ft 1.818
et 12.938
mph 105.463
backed it up with 12.989
There was an srt8 that ran a 13.4 w/cold air and cat back. The srt8 was cool.
I am happy now. I like my truck again.
What do I need to get below a 13.000. I have tried and tried and my best time is13.093 @104.060. I had a 1.83 60' on nitto drag radials. My mods are full bassani exhaust, lfp he,6# pulley, lfp traction bars, jlp forced air, billetflow idler. The truck was tuned by svc motorsports. I am not real...