So i have H&R SS Springs installed. 1.7" drop in the front 2.4" in the rear. I also have BMR LCA's and UCA/ Bracket installed with the pinion angle adjusted properly. When I installed my springs i cut the top half of my bump stops off for clearance. The problem is that I still only have about 3/4" suspension travel before the bump stops make contact. Does anyone know of aftermarket bump stops or if there is another route I can go to get some more clearance?
Sorry about the pic, its the best one I could get peeking through the wheel.
Sorry about the pic, its the best one I could get peeking through the wheel.