Got a very nice custom 4.5" cai from Drew and its making some very good power so far. Right now we just have the drivers side pcv open to the air, the rest of the pcv system is hooked up normally, i.e. the passenger side is hooked to the intake manifold behind the throttle body.
I"m worried this will create an issue with unmetered air getting into the engine, just like a vacuum leak.
my plan was to just put a breather filter on the drivers side and call it a day, but then my tuners pointed out that was not a good idea.
the other thing I was told to do was just put breathers on both sides, but that would not allow any vacuuming out of the oil gases from the engine and sludge will build up.
Ideas welcome.
I"m worried this will create an issue with unmetered air getting into the engine, just like a vacuum leak.
my plan was to just put a breather filter on the drivers side and call it a day, but then my tuners pointed out that was not a good idea.
the other thing I was told to do was just put breathers on both sides, but that would not allow any vacuuming out of the oil gases from the engine and sludge will build up.
Ideas welcome.