I'm getting my first terminator soon. I've looked at the different superchargers and engine setups. I for sure want to go with a kenne bell super charger. I don't want to use a twin turbo system but I'm looking to clear 700 horsepower. What will I need to accomplish this?
How to make more than 700hp?
- Thread starter DRAY93
- Start date
A GT500.......................Just sayin!!
2.8 kenne bell mammoth, supporting mods (a decent fuel system, good clutch, exhaust) and good fuel
2.8 kb and up the boost on race gas...
700 hp
A whole lot of money. Me personnly i went stage 3 cams, 2.9 whipple,fore return fuel system,4# lower,373 gears 80# injectors.Ohya also run 110 oct fuel at $7.75 a gallon. Then u will need a sb throttle body a 3000 maf @ a sct tuner.About 30g will get u started.
A whole lot of money. Me personnly i went stage 3 cams, 2.9 whipple,fore return fuel system,4# lower,373 gears 80# injectors.Ohya also run 110 oct fuel at $7.75 a gallon. Then u will need a sb throttle body a 3000 maf @ a sct tuner.About 30g will get u started.
winning lotto ticket = 700hp
01cobravortech
Banned
Aim lower with the TVS that VMP tuning offers. Address the IRS with the FTBR and then report back.
Anabolic
Banned
yup atleast $15,000-$30,000
I clear 700 on just 21lbs.. The 2.9 whip and e85 will get you there OP.
Report back when you have a terminator and do some searches, just sayin'... Your most cost effective option is to buy one already built.
15-30k u guys? I spent 10-12k and also did k member, built solid rear, kirkey seats and all.
Whipple 2.9 3800$
3.25 pulley 90$
Mac long tubes and o/r x pipe 600
SLP cat back 200
Metco lower and aux pullies 450ish
Lethal budget fuel setup 925$
80# injectors 400
Tb and intake 450$ ish
Fluidyne H/E 350$
170 thermoste 70$
Ba3000maf say 200$
McLeod twin disk setup 1200$ that's the most of it.
Tune 500 and 300$ for a sct
726whp in like under 10k 112octane fuel and makes 660whp on straight 93 pump gas
Unless I'm misunderstanding something its no 15-30k
Maybe ur talking build engine and stuff?
Whipple 2.9 3800$
3.25 pulley 90$
Mac long tubes and o/r x pipe 600
SLP cat back 200
Metco lower and aux pullies 450ish
Lethal budget fuel setup 925$
80# injectors 400
Tb and intake 450$ ish
Fluidyne H/E 350$
170 thermoste 70$
Ba3000maf say 200$
McLeod twin disk setup 1200$ that's the most of it.
Tune 500 and 300$ for a sct
726whp in like under 10k 112octane fuel and makes 660whp on straight 93 pump gas
Unless I'm misunderstanding something its no 15-30k
Maybe ur talking build engine and stuff?
Anabolic
Banned
your prices are a bit off unles you have 3 years to buy used parts? lol
I don't remember prices exact I'm sure I'm not 5k-20k off tho
I did all this in 12 months of owner the car since I had the funds from my last car part out.
Ur more than welcome to get retail for all that and give a total
I'm at work. Not enough time or to worried about it. Just saying could b done way cheaper. And I bought all new
I did all this in 12 months of owner the car since I had the funds from my last car part out.
Ur more than welcome to get retail for all that and give a total
I'm at work. Not enough time or to worried about it. Just saying could b done way cheaper. And I bought all new
Anabolic
Banned
well. for example.. your price on slp catback is way off. lol i shopped around for 3mo & had to buy one new. Cheapest deal i found was 500$
well whatever lets go 10-25k then to please everyone. it costs money. 700hp isnt achieveable like one wanker said with just a pully swap
well whatever lets go 10-25k then to please everyone. it costs money. 700hp isnt achieveable like one wanker said with just a pully swap
Last edited:
That's one thing I I'd buy used / new shape but i did pay like 200 for mine, you can add 250$ to that total and ill still probally b under 10k in power mods
don't take me off as being rude or a jerk. I was just giving my opinion what I've done to my car in 12 months even with my kirkeys, k member, coil overs adjustable shocks front and rear.both Coolant tanks im still under 12-13k I bet
don't take me off as being rude or a jerk. I was just giving my opinion what I've done to my car in 12 months even with my kirkeys, k member, coil overs adjustable shocks front and rear.both Coolant tanks im still under 12-13k I bet
Anabolic
Banned
don't forget if you have the knowledge on installing these items too makes a difference.. If you have to ask how to make 700hp chances are you don't know how to literally.. So I'll bet the other 4k regardless is in install fees. based off your build.
OP you wanna make 700hp, get the 2.8KB if you NEED a KB. with behemoth inlet. I would get a built engine. But if you don't get a nice return style fuel system with 80-105# injectors. Lethal has good kits. ( Ford Mustang and SVT GT500 Performance Parts Specialists - Lethal Performance )
you will need a good intake, probably aftermarket exhaust and about 21psi on race gas. KB is hard to do 700 hp constant without race gas. unless E85 is avail to you
OP you wanna make 700hp, get the 2.8KB if you NEED a KB. with behemoth inlet. I would get a built engine. But if you don't get a nice return style fuel system with 80-105# injectors. Lethal has good kits. ( Ford Mustang and SVT GT500 Performance Parts Specialists - Lethal Performance )
you will need a good intake, probably aftermarket exhaust and about 21psi on race gas. KB is hard to do 700 hp constant without race gas. unless E85 is avail to you
I think you are in built motor territory in the 700 HP range. It can and has been done without, but our tight piston and ring clearance makes you one 5th gear pull away from needing a built motor. I just can't see spending the time and money to make that much power while leaving inherent weaknesses.
I totaled my build at one point here, and it was under $14,000 for the built motor and supporting mods. I did the build myself and collected many used/new unused parts over a two year period. It can be done on a budget if you have some time and patience.
I totaled my build at one point here, and it was under $14,000 for the built motor and supporting mods. I did the build myself and collected many used/new unused parts over a two year period. It can be done on a budget if you have some time and patience.
Users who are viewing this thread
