WTB: Vortech Pulley

[Pingaloca25]

hey guys im looking for a 6 rib Vortech Pulley either a 3.33 or 3.1 pulley.

Thanks

 

[stangnutlx]

I have a stock 3.60 o took off my S trim.

 

[Pingaloca25]

I have a stock 3.60 o took off my S trim.

how many lbs is that rated for?

 

[Pingaloca25]

.......................

 

[stangnutlx]

3.6 is 6-8lbs

 

[Pingaloca25]

shit.....im looking for around 11-13 lbs

 

[Pingaloca25]

bump need this asap

 

[stangnutlx]

need smaller than a 3.3, i use a 3.3 and i see 10psi. Call vortech and buy one

 

[Pingaloca25]

bump

 

[Pingaloca25]

cmon i kno someone has to have 3.1 pulley

 

[scotty98]

if you needed an 8 rib pulley i got what you needed both a 3.33 and 3.12. good luck with the 6 rib might want to try corral:beer:

 

[r1wheelie]

any one know what boost a 3.25 pulley will push I have one of those?

 

[Furinox]

any one know what boost a 3.25 pulley will push I have one of those?

depends on if its non intercooler, aftercooler, or a/a intercooled.

 

[r1wheelie]

depends on if its non intercooler, aftercooler, or a/a intercooled.

its aftercooled

 

[Furinox]

I think the aftercooled kits make 10 psi with a 3.1.

I make 12 psi with my front mount a/a on 2.9

 

[sam92lx]

I think the aftercooled kits make 10 psi with a 3.1.

I make 12 psi with my front mount a/a on 2.9

Any slippage with the 2.9? b/c I'm thinking about going with a 2.9 on my v-2


edit....6-rib that is...

 

[Brutal Metal]

Good question sam92lx I'd like to hear some input on this too!!
So a 3.33 pulley with an air to air is gonna be making less that 10psi??

 

[SuperG]

3.6 is 6-8lbs

If you have a built engine, that boost could be lower. I have the 3.60" still and I only get a max of 5 psi.

 

[Furinox]

Any slippage with the 2.9? b/c I'm thinking about going with a 2.9 on my v-2


edit....6-rib that is...

No slipping using a reichard racing 2.9 6 rib with a gates belt.

 

[Furinox]

Good question sam92lx I'd like to hear some input on this too!!
So a 3.33 pulley with an air to air is gonna be making less that 10psi??

I made 7-8 psi with a 3.33 and front mount.