WTB: Cobra rear brake setup.

[kezell]

I installed a solid axle in my 01 Cobra a while back. I didnt take the brakes off of my IRS. I would like to know what I need or if some one has everything for sale please let me know. Thanks

 

[whitey03]

your calipers are the same. all you need are the larger rotors and brake brackets.

 

[kezell]

Thanks man!

 

[birdman941]

It's late, and I am a bit confused.
Did you put the Cobra brakes onto the solid axle or the GT type brakes?
Which do you need?
I have brackets here for both types.
The calipers for a GT/reg stang are not the same, nor are the rotors.
I am pretty sure I have GT rear rotors and GT calipers in the garage also if thats what you need.

 

[whitey03]

gt rear calipers and cobra rear calipers ARE the same. rotors and brackets are different.

 

[kezell]

I left the GT brake set-up on the Solid axle when I put it in. I want to put the Cobra brakes back on the car. So if you have the caliper brackets pm me a price. Thanks

 

[birdman941]

gt rear calipers and cobra rear calipers ARE the same. rotors and brackets are different.

I am not trying to start anything, believe me.
I went from GT front and rear brakes to Cobra on my engine swap car.
( 2000 GT / 2000 FRPP Cobra crate motor)
The rear rotors on a GT are non-vented and thinner than the Cobras.
The Cobra calipers are nearly identical, but wider where it fits over the rotor.
I compared the two side by side when I was doing the brake swap.
Even the pads are different, but I don't know what the difference is.
Check this link:
http://www.trademotion.com/partloca...3&make=10&model=Mustang&year=2004&catalogid=1

 

[whitey03]

birdman, we're saying the same thing. yes, the rotors are different. yes the caliper brackets are different. No, the calipers themselves are not. Look at the part #s on the calipers, they are the same as well.

 

[thasalvoo]

well how much for those brackets... i have some cobra rear rotors and need to put my gt calipers on??? pm me a price
thanks