widest tire on a 18X10 ? pics ????

[68_GT]

what's the widest that will fit on a 18x10 under our cars ? I got my rear fenders rolled, and now I have the correct year rear end under my car and I need much wider than these 285's. Just wondered if I can get a 335 on there and if so how it looks on 18x10's.

thanks

also what's a good size to get for a drag wheel and 15in drag tire with my power levels ?

 

[94venomV8]

I have seen people put 325 under them with rolled fenders. I have 315 nitto DRs right now and I have clearance on mine and have no rolled fenders. Also my rims are 18X10 saleen wheels. If you go to a 335 I think you may have to clearance some of the suspension components but not totally sure. I do know that the 315 nittos hook pretty hard on the street and I have right now 418rwhp on my car and have no issues unless I drop the clutch hard then they will spin. I am very pleased with those tires and never plan on changing them. Hope that helps

 

[ARdoller]

you can get a 335 michelin pilot sport on an 18x10.

 

[68_GT]

you can get a 335 michelin pilot sport on an 18x10.

I have Michelin Pilots Sport 285/35's now and they seem like a pretty good street tire. I just wonder how a 335 looks on a 10in wheel :shrug:

 

[ARdoller]

335's / 18x10

 

[68_GT]

nice you don't have in rear spacers do you ? are those 335-35's right ?

 

[ARdoller]

its not my car.

 

[venom1997]

widest drag radial is a bfg 315/30/18(bfgs run wider than any other brand) I have bfg 295/35/18 drag radials and they even bulge on my 18x10 they are more like a 315 and the 315 bfgs are more like a 330-335.






this is the bulge with a 295 bfg drag

 

[tomustang]

Your car is going to be so off balance with 335's out back..

 

[crash549]

my 285's just aren't cutting it after seeing these pics.

 

[My94GT]

315s are where id call it a day.

 

[sc98cbra]

335 will fit. But you will rub like hell. 315's will accomplish your task, unless you plan on having a 1000hp car....

If you do plan on getting 335's. Expect to roll your fenders and grind out our fenderwell's.

 

[ARdoller]

the size difference between 315 and 335 is almost unnoticeable to the eye. i bet most people that have 335's have people ask them all the time "are those 315's?"

 

[crash549]

it's all about how big can you go not how big do you actually need.

 

[Red98CobraStang]

I have seen people put 325 under them with rolled fenders. I have 315 nitto DRs right now and I have clearance on mine and have no rolled fenders. Also my rims are 18X10 saleen wheels. If you go to a 335 I think you may have to clearance some of the suspension components but not totally sure. I do know that the 315 nittos hook pretty hard on the street and I have right now 418rwhp on my car and have no issues unless I drop the clutch hard then they will spin. I am very pleased with those tires and never plan on changing them. Hope that helps

those are 305/35/18 nittos, not 315.....

I have the same tire on my Z06 and love them.

Also, what else did you do to get to 418rwhp? I gave you the car with 360rwhp...

 

[Cookieman00x]

I dont understand why you want so much tire.. a 315 should be way more than enough..

I wouldnt do more than a 315 on a 10 inch width..

 

[Blown_By_You]

335 will fit. But you will rub like hell. 315's will accomplish your task, unless you plan on having a 1000hp car....

If you do plan on getting 335's. Expect to roll your fenders and grind out our fenderwell's.

I have 315's with 18x10's...

I still have 1.5" of clearance on the inside of the wheel..

I will run a 335 on a 19x11 when I order my True Forged wheels..

But I don't have quads and I have side exhaust.. The exhaust tips would have been the limiting factor before...

 

[crash549]

those wheels are going to look pretty sharp.