which fuel rail?

[chris 96cobra]

im building my 96 cobra with built bottom an vortech an was wondering what is a good brand fuel rail to run. going to be running around 10 psi boost.
i have seen some UPR rails pretty cheap,but i asking yall for what yall use an experience with them

thanks chris

 

[Quadcammer]

stock rails will be fine.

 

[venom1997]

stock rails will be fine.

+1 dont waste money on rails you wont need

 

[chris 96cobra]

even if i run a aeromotive external pump an regulator :shrug:
i dont wont it to run lean on top end :burn:

 

[jcat_98snake]

i'm running a procharger p1 at 10psi, 255lph pump ad aftermarket regulator (not on the rail), with stock rails and 42lb injectors. No problems whatsoever.

 

[1996_Snake]

even if i run a aeromotive external pump an regulator :shrug:
i dont wont it to run lean on top end :burn:

Well the pump wont matter, you can get adapters to hook the lines up to teh stock rails.

If you go with a Adjustable OEM Type that fits in place of the stock one, you will be fine with Stock Rails.
This would be the type of regulator needed to keep factory rails.
Aeromotive 13102 - Aeromotive Ford Fuel Pressure Regulators - Overview - SummitRacing.com

I cant how ever find the AN to Fuel rail adapter...

 

[Quadcammer]

Lets put it this way, I run stock rails at 700rwhp and no fuel issues.

 

[chris 96cobra]

ok,thanks everyone,i guess i gona say the extra money an keep factory rails if yall an make 700rwhp with stock rails i should be fine,i plan to make low to mid 500 rwhp