Well, I'm finally going to bite the bullet and upgrade the suspension. The Cobra is a quasi daily driver(seem to drive the bike more often) and will more than likely not race her on the track. I do enjoy the curves and onramps though and would like to see some improvements in the IRS capability. Here's a list of what I'm thinking about doing.. The goal is to replace all of the components that will affect alignment. Anything else like subframe connectors or sway bars will be done at a later date. The suspension currently has about 130k miles on it.
Current Springs are Eibach Pros
Looking to get...
FTBR Bushing Kit
Tokico D-Spec Shocks/Struts (Might go down to the Tokico Blues but wanted the adjustability for the harsh roads and have the option to adjust for when travelling out to the western part of VA and NC.
Steeda x2 Ball Joints
Steeda or Maximum Motorsports Bumpsteer Kit
Steeda or Prothane Steering Rack Bushing Kit
J&M Caster/Camber Plates
IRS Passenger side lateral link (anyone know of a lesser expensive or aftermarket version of this thing for a reasonable price?)
I have also been thinking about the bushings in the lower control arms up front as well.
Other than suspension, the differential will be gone through. I might upgrade the gears from 3.27.
Is there anything that I may have missed or should look into adding to the project?
Thanks in advance!
Current Springs are Eibach Pros
Looking to get...
FTBR Bushing Kit
Tokico D-Spec Shocks/Struts (Might go down to the Tokico Blues but wanted the adjustability for the harsh roads and have the option to adjust for when travelling out to the western part of VA and NC.
Steeda x2 Ball Joints
Steeda or Maximum Motorsports Bumpsteer Kit
Steeda or Prothane Steering Rack Bushing Kit
J&M Caster/Camber Plates
IRS Passenger side lateral link (anyone know of a lesser expensive or aftermarket version of this thing for a reasonable price?)
I have also been thinking about the bushings in the lower control arms up front as well.
Other than suspension, the differential will be gone through. I might upgrade the gears from 3.27.
Is there anything that I may have missed or should look into adding to the project?
Thanks in advance!