whats your cobra wish list?

[evil04svtcobra]

what are your plans for your cobra?

mods of any kind. can be something you want to get in a week or 2 years... whatever!


here is my wish list!:coolman:
17x10.5 replicas with 315 mickey thompsons
killer chiller
gt pumps
fore hat
dual fpdm's
race tune, for higher boost!!!
maybe one day behemoth intake

 

[sprusak1]

whipple, IRS bushing kit, other wheels (not sure)

 

[RAPTOR5V]

whipple. period. some day.. too many hobbies and not enough dough

 

[03Cobrra]

Longtubes, tubular front end, 50 shot and retune on race gas.

 

[rotor_powerd]

Ultimately, Whipple or KB, and all supporting mods.

Realistically within the next few months... intake, pulley, tune.

 

[SLEEPERSTATUS]

kb or twin turbo

 

[xenodragon]

In this order

1) Clutch
2) Single Blade t/b
3) Springs
4) Tint
5) Whipple

 

[lococobra03]

To be paid for :bash:

 

[Jroc]

If money wasn't an option on top of the mods I already have it would go something like this:

-Either a built 302 aluminum block stroker motor, or built Boss Modular block with a stroke crank to = 324 ci's, both with ported Jan 05 heads and custom ground cams, and the FGT valve covers
-MM Kmember and A-arms, or a Griggs SLA front suspension
-Some badass brakes
-CCW Classics. 18x11's rear, and 18x9.5's front wearing Michilen Pilot PS2's on all corners
-KB 2.8 with one of the big inlets and TB's.
-Metco pulley's
-Cobra Daytona seats


There's plenty more little stuff like fuel system upgrades, Grigg inner SFC's, etc, but you get the picture.

 

[SVTburnout]

to have a motor that lasts longer than a month!! FTW!!!

#4 being put together as we speak

 

[03cobra#694]

To be paid for :bash:

:lol:

to have a motor that lasts longer than a month!! FTW!!!

#4 being put together as we speak

KB w/ all supporting mods.
A set of TF wheels and new tires.
Bruce`s IRS kit.
Clutch for above mods.
and on and on................................

 

[04_sccobra]

03/04 cobra(should have one by end of may :burnout
Stiegemeier Ported Blower, Throttle Body and Plenum/ or whipple
2.76 BilletFlow Upper Pulley
100 mm Idler Belt
CAI
exhaust
NGK TR6 spark plugs
Diablo Predator Tuner
Good set of DR's
GT pumps
tinted tail lights

 

[Fireguy615]

A light bar for my vert.....thats it. I am trying to resist the urge of dumping a bunch of cash into my car that I will never get back.

 

[JymBart]

The good news for me is, .........I'm Done and I'm happy with the results!! I don't want to spend any more money (all ready have over $20,000 in it) in Mods.

JymBart

 

[92stanglx]

1) Steiggy ported blower w/ 2.93 pulley w/ idlers
2) AFCO heat exchanger
3) H&R race springs
4) Meir Racing subframes
5) Billet Flow IRS brace
6) Gauges
7) New sound system

475rwhp epper:

 

[IceMan]

ported blower, BAP, bushings and brace

 

[SVT03Chris]

In order

1) KB 2.2 w/ supporting mods
2) Borla Stinger CB for SRA
3) New wheels (18" Cobra Reps)
4) New springs
5) In Dash Pioneer screen

 

[C1Sn8k]

To be paid for :bash:

My (and the Cobras) biggest wish!!

 

[68_GT]

if I had the money to spend I'd add a single turbo and run some big numbers with compound boost on pump gas

a little more realistic
I'd like to add 60# injectors, and a 4# lower to what I'm currently doing below

reality
get a BAP, put on my MAFIA, put on my 2.76 BF upper and aux idler, button up my NOS kit, get dyno tuned, and live happily ever after.

I spent $40K in mods on my last Mustang I'm not doing it again. Same budget, but different priorities now days. I'm happy to spend $100 on a used part lately lol

 

[Smacked_in_ATL]

1. New clutch - on the way actually...
2. UPR K-member and coil overs with 90/10s.
3. 75 dry shot
4. Nitrous/C16 dyno tune.
5. 10 seconds in the 1320 with no port.

:beer: