80lb is smaller. Id1000s are low 90 pound injectors, I have seen them referred to as 92 before but it depends a lot on base fuel pressure as that could go up or down a few pounds depending on where your regulator is set if you run a return style system.
Others are cheaper and are not tested and matched the same. Also double check at what pressure and voltage some companies claim their version of a "1000cc" injectors have to be at to obtain it.
Others are cheaper and are not tested and matched the same. Also double check at what pressure and voltage some companies claim their version of a "1000cc" injectors have to be at to obtain it.
Not Deatchwerks, they are very close to or equal to ID injectors. Lot's of info out there comparing how the two are built and tested. Now anything Siemen Deka and you get whatever you get, no flow matching.