What is comparable to id1000 injectors?

[Fang]

For instance what are 80lb injectors compared to id 1000?


Sent from my iPad using Tapatalk

 

[sleek98]

80lb is smaller. Id1000s are low 90 pound injectors, I have seen them referred to as 92 before but it depends a lot on base fuel pressure as that could go up or down a few pounds depending on where your regulator is set if you run a return style system.

 

[yellow03cobra]

deatsch injectors have the 95lb listed as 1000cc and they are cheaper

 

[wmfateam]

Others are cheaper and are not tested and matched the same. Also double check at what pressure and voltage some companies claim their version of a "1000cc" injectors have to be at to obtain it.

Sent from my XT1254 using Tapatalk

 

[Fang]

Thanks for the input. Exactly what I needed to know. Wonder why certain companies call them different things? Should just be a universal sizing.

 

[rotor_powerd]

"What is comparable to ID1000 injectors?"

Nothing. They are the best in the business by a long shot.

 

[R.D.P.]

Others are cheaper and are not tested and matched the same. Also double check at what pressure and voltage some companies claim their version of a "1000cc" injectors have to be at to obtain it.

Sent from my XT1254 using Tapatalk

Not Deatchwerks, they are very close to or equal to ID injectors. Lot's of info out there comparing how the two are built and tested. Now anything Siemen Deka and you get whatever you get, no flow matching.

 

[wmfateam]

Deatchwerks are decent copy cats, but their flow testing is not the same.

Sent from my XT1254 using Tapatalk