What did you do for your Terminator today?

[JetmechF16]

That's a good idea. I should do that to mine. Is the plastic welding difficult?

Nope super easy, kits are cheap on amazon. Just make sure it comes with plastic filler rods and metal mesh and you're good to go.

 

[JetmechF16]

A few last details before I put her away for the year.

Oil change, moving the fuel regulator from the wheel well to engine bay, and replacing the factory radio now that the disc player is jammed. I'll be doing a Android head unit with the plan to run shadow dash and tie into the MS3 so I can display a digital dash.

What's the reasoning for moving the regulator, accessibility? I put mine inside the fender mounted to the passenger door hinge, no heat but a pain to mess with the pressure adjustment if I ever needed to.

 

[03cobra#2]

What's the reasoning for moving the regulator, accessibility? I put mine inside the fender mounted to the passenger door hinge, no heat but a pain to mess with the pressure adjustment if I ever needed to.

I had it in a spot that the wheel was rubbing against it when clocking the wheel all the way to the left. I figured if I'm going to re-do it I'll just put it in the engine bay.

I got the lines and fittings yesterday so I'll mess with it tonight.

 

[gotjack]

Before and after

Sent from my iPhone using the svtperformance.com mobile app

 

[CobraVenom01]

Cleaned her up a bit. Gotta install a whole shit load of parts including wrinkle blue valve covers

Sent from my iPhone using Tapatalk

 

[CJHAMIL]

View attachment 1816662
Before and after View attachment 1816663


Sent from my iPhone using the svtperformance.com mobile app

Phenomenal transformation! Very tasteful

 

[tporter67]

Looks awesome, hopefully aux idler is on the list.

 

[01yellercobra]

Looks awesome, hopefully aux idler is on the list.

If you're referring to gotjack, there's an aux idler under the blower pulley.

 

[gotjack]

Phenomenal transformation! Very tasteful

Thanks man. Have some more under the hood dress up items to instal spring time from Harpell auto fab


Sent from my iPhone using the svtperformance.com mobile app

 

[fangin2u]

I took that yellow rubber piece on the hood latch off.

 

[gotjack]

I took that yellow rubber piece on the hood latch off.

Does it come off easy? Anyone make a black rubber one?


Sent from my iPhone using the svtperformance.com mobile app

 

[CobraVenom01]

To much ‍

Sent from my iPhone using Tapatalk

 

[FleeMan]

Well that escalated quickly, lol

 

[gotjack]

To much ‍

Sent from my iPhone using Tapatalk

Did you powder coat the valve covers or get new ones?



Sent from my iPhone using the svtperformance.com mobile app

 

[Bullitt1448]

To much ‍

Sent from my iPhone using Tapatalk

All great parts!, hope the install goes easy for you

 

[TerminatorCobraJP]

I took that yellow rubber piece on the hood latch off.

You have a Whipple with the intake on the drivers side of the engine bay? I thought only the Kenne Bell Mammoths were like that.

Sent from my SM-S536DL using the svtperformance.com mobile app

 

[fangin2u]

You have a Whipple with the intake on the drivers side of the engine bay? I thought only the Kenne Bell Mammoths were like that.

Sent from my SM-S536DL using the svtperformance.com mobile app

It’s a Lysholm.

 

[CobraVenom01]

Did you powder coat the valve covers or get new ones?



Sent from my iPhone using the svtperformance.com mobile app

Found a set on marketplace for $150 shipped and had them powder coated


Sent from my iPhone using Tapatalk

 

[CobraBob]

View attachment 1816662
Before and after View attachment 1816663


Sent from my iPhone using the svtperformance.com mobile app

Cleaned her up a bit. Gotta install a whole shit load of parts including wrinkle blue valve covers

Sent from my iPhone using Tapatalk

You both need to park your Cobras side by side with the hoods up. LOL. You seem to have identical tastes in mods/parts.

To much ‍

Sent from my iPhone using Tapatalk

Mighty fine parts there! I love the wrinkle blue covers!

 

[01yellercobra]

Dropped the diff to reseal it so it doesn't leak all over my new tail pipes. I grabbed a Lube Locker gasket and a stud kit a local Cobro put together. I had I helicoil one of the holes because it pulled the threads out when I went to torque it. So that might have been an issue before.