What did you do for your Terminator today?

[LS WUT]

Did my MM rear brake lines so I could mount up the 15x10's. The ride is SO much more comfortable with the rear of the car raked up too. The look is definitely cool though, I dig it.

edit: meh, last pic quality sucks since I zoomed in too much. Shows the contrast between the front/rear though.

Love me a drag pack

 

[LS WUT]

What’s up gentleman, question for you guys. So now that my black cobra is down for the new clutch, flywheel, and TOB. I’m gonna be doing some more stuff to it, because **** it. I’m gonna be adding the 2.7 pulley, 60#injectors, and a BAP for some E85. Does anyone know what size belt I’ll need to run the 2.7 pulley? I’ve got metco idler pulley set, and a stock alternator pulley. I’ve been told a 72.5 then a 74.5, just wonder which belt it will be before I order it.

 

[*Jay*]

What’s up gentleman, question for you guys. So now that my black cobra is down for the new clutch, flywheel, and TOB. I’m gonna be doing some more stuff to it, because **** it. I’m gonna be adding the 2.7 pulley, 60#injectors, and a BAP for some E85. Does anyone know what size belt I’ll need to run the 2.7 pulley? I’ve got metco idler pulley set, and a stock alternator pulley. I’ve been told a 72.5 then a 74.5, just wonder which belt it will be before I order it.

I always use to use Cobra Bobs chart but cant seem to find it now, 74.5" seems right according to LMR.

https://lmr.com/products/2003-2004-Ford-SVT-Mustang-Cobra-Supercharger-Belt-Guide

 

[LS WUT]

I always use to use Cobra Bobs chart but cant seem to find it now, 74.5" seems right according to LMR.

https://lmr.com/products/2003-2004-Ford-SVT-Mustang-Cobra-Supercharger-Belt-Guide

Thanks very much brother!

 

[robvas]

Filled the tank all the way. Started leaking from I'm guessing the filler neck? Came out of the store to a puddle under the car. Oops.

 

[MG0h3]

Filled the tank all the way. Started leaking from I'm guessing the filler neck? Came out of the store to a puddle under the car. Oops.

Sucky. There’s a gasket/seal that goes around the neck where it fits into the tank.

Have you had the tank out recently?


Sent from my iPhone using the svtperformance.com mobile app

 

[robvas]

Just the beginning. Expect more businesses to vacate Portland. With all of the un-prosecuted thefts, businesses cannot afford to stay open. If thieves were repeatedly breaking into homes in my neighborhood, in short time I'd leave as well. The more crimes go unchecked, the more crime increases. Maybe Portland will become a city solely inhabited by the homeless, Antifa, derelicts, thieves, and thugs. Not unthinkable anymore. Crime in these Blue states/cities is just out of control. What will it take for citizens to say...ENOUGH!

Nope. But I haven't put more than 3/4 of a tank in it the entire time I've had it.

I went straight home and it leaked out another small puddle. Drive it around to eat up some gas and parked it, dry underneath.

 

[2003RedfireVert]

Filled the tank all the way. Started leaking from I'm guessing the filler neck? Came out of the store to a puddle under the car. Oops.

Earth killer.

 

[TitanSvt]

Got the @04sleepersauce tune

Sent from my SM-S916U using the svtperformance.com mobile app

 

[01yellercobra]

Nope. But I haven't put more than 3/4 of a tank in it the entire time I've had it.

I went straight home and it leaked out another small puddle. Drive it around to eat up some gas and parked it, dry underneath.

It could also be the gasket around the fuel hat. Though I think when I messed up the install on mine it started gushing gas while still filling up. It was pretty easy to figure out though.

I took advantage of light traffic today and drove it to work. Also took the chance to grab a datalog for testing purposes

 

[muscleatsrice]

Got the @04sleepersauce tuneView attachment 1799723View attachment 1799724

Sent from my SM-S916U using the svtperformance.com mobile app

What seats are those, any more shots of them?

 

[SsnakeSVT03]

Found some OG Ford Racing Coil Covers and was finally able to put them on! Wiped the engine bay down quickly but still not clean enough to my spec. Will have to go through every nut and bolt one of these weekends…

 

[prs97]

Did the rear brakes & new rear sway bar links.

The rear left rotor was looking a bit nasty and I think one of the pads glazed up. It stopped fine but figured it was time for new rotors & pads. Fronts looked good still and that was enough sweating my butt off in the driveway so fronts can wait till another day.

While in there, the passenger side sway bar link looked messed up and the boot was all torn. After changing, it's back to the normal levels of clunk in the suspension.

 

[2003RedfireVert]

My favorite view driving. Haven’t done much lately. Been super hot. Took it to cars and coffee last weekend. Got it safety inspected.

 

[CobraBob]

Found some OG Ford Racing Coil Covers and was finally able to put them on! Wiped the engine bay down quickly but still not clean enough to my spec. Will have to go through every nut and bolt one of these weekends…

The coil covers look great. As does your engine bay.

 

[CobraBob]

View attachment 1800498
My favorite view driving. Haven’t done much lately. Been super hot. Took it to cars and coffee last weekend. Got it safety inspected.

The view......and the sweet blower whine!

 

[SsnakeSVT03]

The coil covers look great. As does your engine bay.

Thank you Bob! I remember your DSG had them. Always was a nice car before it went to the crackhead Joshua…

 

[Santiago]

Came for a bbq to my buddy’s house today and he said I always wanted a vette lol

 

[LS WUT]

View attachment 1800554
Came for a bbq to my buddy’s house today and he said I always wanted a vette lol

I think it’s official. Everyone and their cousin has a god damn sonic blue but me.

 

[PC03GT]

Freshly painted mirrors and switched to the pony emblem