I have something similar but the 3d printing is failing
What did you do for your Terminator today?
- Thread starter mrose75
- Start date
Company in Puerto Rico made them I think Breton was the name
I have used them in the past on some cars I have owned. I went with the polyglass series ps165v1 and some pc165's in the rear. Jl Audio 900/5 amp and a 10 inch Jl Audio w6 subwoofer. I decided to use an old school Audio Control EQS instead of a DSP to tune the stereo which I think will come out rather awesome. All tied together with a Kenwood deck.
I put Focal speakers in my Cobra 2 years ago. Component speakers up front, coaxial in the back. All run off a 5 channel 800w Kicker amp (75w x5 and 500w x1) My sub is a JL that I run in a Stealthbox
I'm very happy with how the Focals sound as well.
I still want to see a completely shaved 99-04 mustang/cobra/mach/*edit*/bullitt
I mean everything: badges, door handles, door locks, the gaps between the side scoops and body, spoiler and trunk, c pillar to rear quarter, etc... Everything.
One of my powerball dreams
Last edited:
My buddy did the door handles on his new edge. He built the car in the mid 2000’s before 2010 when the over done stuff was all the rage
I’ve always wanted to see what a fully integrated trunk/spoiler would look like as one cast piece. Obviously if you just did filler and painted it, it would crack and look awful with in a year from bending forces.
I’m honestly salty I lost the ability to run a stock heat exchanger hood because I love the stock lines of these cars too much. I have an s281E hood but I’d love to contract a 1” taller cowl 03 cobra hood. I’ve seen the 2-3” beefier 03 cobra cowl hood from cervinis and may try one
I’ve always wanted to see what a fully integrated trunk/spoiler would look like as one cast piece. Obviously if you just did filler and painted it, it would crack and look awful with in a year from bending forces.
I’m honestly salty I lost the ability to run a stock heat exchanger hood because I love the stock lines of these cars too much. I have an s281E hood but I’d love to contract a 1” taller cowl 03 cobra hood. I’ve seen the 2-3” beefier 03 cobra cowl hood from cervinis and may try one
Attachments
I've seen a couple, probably mostly members on here, that had one or two of the things I mentioned, but not everything all together.
Closest one that comes to mind was a ridiculously clean Bullitt on here. 01 front bumper, debadged. I'm sure I'm forgetting every aspect of it. I'll have to see if I have it saved
*edit* +Mach1 chin
Last edited:
I dream of a terminator/s281 rear spoiler blend
Was it this gents?
Attachments
On Forza I bought another 03 cobra from the auction house and did a saleen kit but kept the 03 cobra hood and ductail. I have it yellow now but will do it mystichrome.
Not “clean” but very very mean
I dunno how I feel about the center exhaust but the shaved bumper, stance, wheels, and orange are gorgeous. But that's not CO is it? Wait, is it CO? With a black wrap on the pillars? It's a beaut Clark.
This is an example of piecing together bits and pieces of different trim/sub-models that I loved
I didn't know that you can bounce checks in Forza.
It’s option F8 on the Home Screen next to the big bounce house.
@BOOGIE MAN I’m not in love with center exit either because it loses the irs parallels (video game pic but we all get the idea)
Edit real car red. The fact we wrap our nice hot exhaust piping around a nice gas tank in the very back of our nice mustangs…… Colletti was a stud for figuring out how to keep the fox body alive and the mustang going back in 1993/1994. They were supposed to can the architecture and go front wheel drive because of (not exclusively) things like said gas tank location.. they reinforced the bumpers and here we are today haha
Still has to be one of the best looking rear ends of all cars of all time
Attachments
Last edited:
Not completely shaved but pretty close, door lock, antenna, flush door handles, side scoops, rear reflectors
Attachments
My antenna is shaved too.
I saw a CO at MW years ago that had so much custom work done, it was insane in person. I checked it out for over an hr, just kept noticing all the custom work. Had Custom deck lid, all shaved side scoops, custom cowl cobra hood etc. He sold the car, new owner got rear ended and totaled the car shortly after taking ownership. I’ll dig through my pictures and post them up.
I saw a CO at MW years ago that had so much custom work done, it was insane in person. I checked it out for over an hr, just kept noticing all the custom work. Had Custom deck lid, all shaved side scoops, custom cowl cobra hood etc. He sold the car, new owner got rear ended and totaled the car shortly after taking ownership. I’ll dig through my pictures and post them up.
Love to see the pics of that one,
What are you doing for an antenna now, not a big concern for me because I generally don’t listen to the radio but if I am going to have a radio in the car it’s gotta work, just one of my things, if it’s there, it has to fulfill its intended purpose.
I knew that if there was a way to be a scumbag in a video game you would figure it out. Scumbags gonna scumbag.
Go back to where you came from.
I run one from a boat that sticks to the inside of the windshield near the defroster. You cannot see it unless you look for it. Not visible from the outside My windshield is tinted too, so it interferes but I do still get most stations. But I usually run Bluetooth anyway so it doesn’t bother me.
Car Radio Stereo Hidden Antenna Stealth FM AM Fit Vehicle Truck Motorcycle Boat | eBay
This is a hidden built-in mini car radio antenna Remove that ugly antenna and install this cool hidden powered antenna with amplifier. Car Hidden Antenna. A universal AM/FM antenna, you Can Adjust The Location Of The Antenna For Best Reception Excellent.
www.ebay.com
I like this idea….I run one from a boat that sticks to the inside of the windshield near the defroster. You cannot see it unless you look for it. Not visible from the outside My windshield is tinted too, so it interferes but I do still get most stations. But I usually run Bluetooth anyway so it doesn’t bother me.
Car Radio Stereo Hidden Antenna Stealth FM AM Fit Vehicle Truck Motorcycle Boat | eBay
This is a hidden built-in mini car radio antenna Remove that ugly antenna and install this cool hidden powered antenna with amplifier. Car Hidden Antenna. A universal AM/FM antenna, you Can Adjust The Location Of The Antenna For Best Reception Excellent.www.ebay.com
Users who are viewing this thread
