I have a 99 cobra and was wondering what trans and what size clutch it is? I think its a tremec 3650 and an 11" but I wanted to be sure before I order a clutch for it. Thanks again everyone.
what clutch and trans?
- Thread starter saleenmark30
- Start date
Its a t-45, but im not sure on the clutch size
I thought they were 3650 but I'm not sure thats why I'm asking.
I was not sure because I'm so use to the fox bodies.
Yes, same sized clutch as 01. But they have the T45.
Is there anything special about the 03-04 cobra clutchs? They are pretty reasonably priced. Anything else needed other than pressure plate, disc and flywheel?
+1....like he said t-45 matted with an 11" clutch
why not just get a spec clutch. good prices too
I was just curious because I tend to lean towards factory parts but on something like this I know you guys have alot of knowledge and past experience with these.
Use the FRPP Cobra clutch for an 03.
Replace the TOB, pilot bearing, and if you can swing it,
put in an FRPP aluminum Flywheel from a 2000 Cobra "R".
You might want to replace the clutch cable,
and if you do, use a factory Ford piece.
Replace the TOB, pilot bearing, and if you can swing it,
put in an FRPP aluminum Flywheel from a 2000 Cobra "R".
You might want to replace the clutch cable,
and if you do, use a factory Ford piece.
Last edited:
Thanks for all the info and suggestions. I love the site you guys are always so helpful and nice!
Users who are viewing this thread
