BACK UP AND NOW OFFICIALLY AUTHORIZED TO SELL THE FIX
Almost all of us have it and if you don't yet you will, the infamous mirror shake. Well I got sick of it and made a fix..... and it works! Simply pop the mirror out of the housing, remove the worn out loose fitting foam isolater disk and replace with my thicker better fitting disk...... say goodbye to shaky mirrors!
2015/07/04 - 7398 miles on my set no issues or vibrations thus far will keep updated
$10 shipped gets you a pair within the US, $12 for shipment to Canada. please also include your screen name in the notes so I can update the list
PAY PAL [email protected]
INSTALLATION :
First press the bottom inner corner of your mirror in (or adjust with motor within the car) like pictured
While holding corner in place slide your fingers with other hand behind outer top corner of mirror. Gently grasp and pull till u feel/ hear the six retainer clips let go of mirror motor
Remove worn isolater and replace with new isolater NOTE: MAKE SURE SMALL CUTOUTS LINE UP WITH THE TWO SMALL TABS ON TOP AND BOTTOM OF CUP. ALSO MAKE SURE ISOLATER IS FULLY SEATED IN CUP BELOW THE SIX RETAINING TABS!
time to reinstall .....
Make sure to line top and bottom tab points up with the tabs on the mirror cup if they don't line up isolater just needs to be flipped over
once your sure it's aligned apply moderate equal pressure over the whole surface of the mirror to press back onto motor ( i use 2 different methods. first being with the mirror properly positioned apply pressure just outside the ring area in small sections working around the area of the ring seating the clips. also you can try using both palms applying pressure to just outside the ring area.
TO ENSURE PROPER INSTALLATION I STRESS USING THE NEXT STEP TO TEST JUST PRESSING HARDER ON THE MIRRORS YOU RUN THE RISK OF BREAKING MIRROR
Lastly for peace of mind I put one finger behind mirror and apply some pressure to make sure all six tabs are engaged. If they aren't it will pop back off very easily so be ready to catch it! When properly installed one finger preassure should not be able to remove
WARNING:I AM NOT RESPONSIBLE FOR BROKEN MIRRORS DUE TO IMPROPER INSTALLATION OR TO MUCH PRESSURE APPLIED DURING INSTALLATION .
Thanks all
-Steve
Paid and shipped list:
SUPER KAZ - SHIPPED
BLACKSN8KE1988 - SHIPPED
TORRANCE - SHIPPED
ASIERRA1 - SHIPPED
PRUITT146 - SHIPPED
SCREAMINGMQCH46 -SHIPPED
SENKAK - SHIPPED
ZEMEDICI - SHIPPED
BLK03COBRAVENOM - SHIPPED
03 COBRA RACER - SHIPPED
ASIERRA1 - SHIPPED
NEVERSATISFIED - SHIPPED
THUNDERW - SHIPPED
WOODY6799- SHIPPED
JIBBER - SHIPPED
COMPOCOBRA 04 - SHIPPED
LARUEI - SHIPPED
ALBERTS03COBRA - SHIPPED
B-O-B'03 - SHIPPED
BLU3VN0M - SHIPPED
CUDA99 - SHIPPED
1SICK04COBRA - SHIPPED
JK_AKTION - SHIPPED
TBCOBRA - SHIPPED
COBRA940 - SHIPPED
CAARON101 - SHIPPED
FUZZYCOBRA - SHIPPED
COBRAKC - SHIPPED
CINCH1985 - SHIPPED
GT347MUSTANG - SHIPPED
CTGREDDY - SHIPPED
DILLEY - SHIPPED
UNCLESAM - SHIPPED
MYPONYJOSE - SHIPPED
BadBlue98GT - shipped
5spd07gt - shipped
04whitesvtlight - shipped
TK Doom - shipped
Stockmachoxford -shipped
west08 - shipped
jpk - shipped
Almost all of us have it and if you don't yet you will, the infamous mirror shake. Well I got sick of it and made a fix..... and it works! Simply pop the mirror out of the housing, remove the worn out loose fitting foam isolater disk and replace with my thicker better fitting disk...... say goodbye to shaky mirrors!
I installed my sideview mirror pad from quick88lx last year and just wanted to report that it is still working. I only had bad shake on the drivers side, the passenger side has been fine.
Since this, I totally notice drivers side mirror shake on my other cars! Seems this is a common problem across car manufacturers and I bet quick88lx could make a small business supplying a side view mirror fix for every make and model.
2015/07/04 - 7398 miles on my set no issues or vibrations thus far will keep updated
$10 shipped gets you a pair within the US, $12 for shipment to Canada. please also include your screen name in the notes so I can update the list
PAY PAL [email protected]
INSTALLATION :
First press the bottom inner corner of your mirror in (or adjust with motor within the car) like pictured
While holding corner in place slide your fingers with other hand behind outer top corner of mirror. Gently grasp and pull till u feel/ hear the six retainer clips let go of mirror motor
Remove worn isolater and replace with new isolater NOTE: MAKE SURE SMALL CUTOUTS LINE UP WITH THE TWO SMALL TABS ON TOP AND BOTTOM OF CUP. ALSO MAKE SURE ISOLATER IS FULLY SEATED IN CUP BELOW THE SIX RETAINING TABS!
time to reinstall .....
Make sure to line top and bottom tab points up with the tabs on the mirror cup if they don't line up isolater just needs to be flipped over
once your sure it's aligned apply moderate equal pressure over the whole surface of the mirror to press back onto motor ( i use 2 different methods. first being with the mirror properly positioned apply pressure just outside the ring area in small sections working around the area of the ring seating the clips. also you can try using both palms applying pressure to just outside the ring area.
TO ENSURE PROPER INSTALLATION I STRESS USING THE NEXT STEP TO TEST JUST PRESSING HARDER ON THE MIRRORS YOU RUN THE RISK OF BREAKING MIRROR
Lastly for peace of mind I put one finger behind mirror and apply some pressure to make sure all six tabs are engaged. If they aren't it will pop back off very easily so be ready to catch it! When properly installed one finger preassure should not be able to remove
WARNING:I AM NOT RESPONSIBLE FOR BROKEN MIRRORS DUE TO IMPROPER INSTALLATION OR TO MUCH PRESSURE APPLIED DURING INSTALLATION .
Thanks all
-Steve
Paid and shipped list:
SUPER KAZ - SHIPPED
BLACKSN8KE1988 - SHIPPED
TORRANCE - SHIPPED
ASIERRA1 - SHIPPED
PRUITT146 - SHIPPED
SCREAMINGMQCH46 -SHIPPED
SENKAK - SHIPPED
ZEMEDICI - SHIPPED
BLK03COBRAVENOM - SHIPPED
03 COBRA RACER - SHIPPED
ASIERRA1 - SHIPPED
NEVERSATISFIED - SHIPPED
THUNDERW - SHIPPED
WOODY6799- SHIPPED
JIBBER - SHIPPED
COMPOCOBRA 04 - SHIPPED
LARUEI - SHIPPED
ALBERTS03COBRA - SHIPPED
B-O-B'03 - SHIPPED
BLU3VN0M - SHIPPED
CUDA99 - SHIPPED
1SICK04COBRA - SHIPPED
JK_AKTION - SHIPPED
TBCOBRA - SHIPPED
COBRA940 - SHIPPED
CAARON101 - SHIPPED
FUZZYCOBRA - SHIPPED
COBRAKC - SHIPPED
CINCH1985 - SHIPPED
GT347MUSTANG - SHIPPED
CTGREDDY - SHIPPED
DILLEY - SHIPPED
UNCLESAM - SHIPPED
MYPONYJOSE - SHIPPED
BadBlue98GT - shipped
5spd07gt - shipped
04whitesvtlight - shipped
TK Doom - shipped
Stockmachoxford -shipped
west08 - shipped
jpk - shipped
Last edited: