Using the SCT X3 for datalogging, etc

[VADER*]

I hate to ask this question, I searched and it seems everybody knows how to use this thing. I read the online manual, and it still doesnt make much sense. I really just want to find out my fan settings, but I cant figure out how to read them on the X3, if its even possible. Do I plug it in ,and start the car and go from there? Not exactly datalogging, but just to to some live monitoring.

Or for fan settings, should I just use the trip thing, and watch when the fans go on and off?

I feel so dumb asking this. Thanks. I should delete the post when I find out

 

[03cobra#694]

Plug the X3 in and turn the key on.Then go to your tune selection that your running,then scroll through the adjustable parameters until you come to fan settings.There will be one for low speed and one for high speed.
Note:Some tuners(person,not handheld itself) have it set so you can`t read or change anything.

 

[VADER*]

I checked the tune settings, looks like low fan 170 high fan 180, I didnt want to get to far into it, and screw something up.

 

[03cobra#694]

It`s real easy to change them if you want.

 

[VADER*]

What does this mean? you would need the PRP to view all 4

Is it a program to download?

 

[03cobra#694]

What does this mean? you would need the PRP to view all 4

Is it a program to download?

It means you can change your high and low speed fan settings with the X3 as long as your tuner doesn`t have them locked out.

 

[VADER*]

Does Justin at VMP normally block them?

 

[03cobra#694]

No,Justin did mine.