Tvs swap help needed

[JBN]

Out in my driveway doing a stock '13 tvs swap onto my 07, and looks like the elbow off the 13 is different as far as the vacuum lines go. How do you remedy this?

 

[JBN]

 

[Ninjak]

I think there may be a adapter kit you will need to make it work...I know I had the reverse problem when I did a ported L&M elbow on my 11. Shoot VMP a call. They may have the answer.

 

[Bravo gt 500]

I use this one on my 2013 tvs


http://www.billetproshop.com/product/2013-tvs-elbow-evap-fitting-shelby-gt500/

 

[Stri8ed]

I threaded that hole and put a 90 degree brass ribbed elbow in there.

 

[brian98svtsnake]

I used the bps piece

 

[enormous]

BPS adapter is the way to go.

 

[BilletProShop]

this is what you need my friend

http://www.billetproshop.com/product/2013-tvs-elbow-evap-fitting-shelby-gt500/

in stock and ready to ship!

 

[JBN]

Appreciate the help guys! Thanks!

 

[black99lightnin]

What I did was went to O'reilly's and bought a brass freeze plug to fill the extra hole, silicone it in. Then you'll need a T or Y fitting to tie the two vacuum lines together. Probably about $10 bucks in parts. To get the fitting out the factory line you have to pull and turn at the same time. It's a little difficult.

 

[crazy4life]

If u don't want to wait for parts post 12 in this thread works just fine
http://www.svtperformance.com/forums/showthread.php?865765-How-many-2013-TVS-on-2007-2012-GT500-s

 

[VNMOUS1]

Simple. From the leaders in TVS.

http://vmptuning.com/07-12-gt500-induction/evap-tube/



BJ

 

[JBN]

Thanks for all the help guys. I ended up buying a bushing and 90* barb fitting and making it work. Cars up and running like a champ!