Tune Only Guys -- What Times Have You Run?

AWESOMO 4000

New Member
Established Member
Joined
Sep 6, 2005
Messages
47
Location
Parts Unknown
Hey all -

Recently purchased the Pro-Cal tuner....works well, no ping, great torque around town but I feel with 3.73s and a manual, I'm usually past 3,500rpm most of the time anyway.

Was considering a Steeda Tune/Cold Air Combo next time they have their sale, or an AED tune with no cold air since they may or may not do a whole lot.

What times have you guys ran with just a tune on street tires? With Procal on a Brembo Premium GT and 3.73s, I'm at 12.76 @ 112.24. The rev limiter is hampering times for sure, would really like to get something that lets it eek out a few hundred rpm and not try to shift to 5th. 60's are consistently low-mid 1.9s.
 

me32

BEASTLY SHELBY GT500 TVS
Moderator
Premium Member
Joined
Sep 6, 2005
Messages
18,487
Location
CA,NorCal
when I had my auto/brembo 2013 I was running 12.1-12.2 with AED tune only. I ran 12.8 stock
 

Sledder

New Member
Established Member
Joined
Apr 2, 2013
Messages
18
Location
Michigan
13.09 bone stock, 2.00 60 ft
12.57, 1.96 60 ft with a Lund e-mail tune, drag radials, C&L CAI
 

coyote302

New Member
Established Member
Joined
Apr 9, 2013
Messages
260
Location
montreal
11.76 at 118 ....tune , cai and tire...i use m/t as soon as i load my tune so i dont hane any pass on stock pirelli....
 

zemog255

Member
Established Member
Joined
May 28, 2007
Messages
178
Location
Texas
12.08@113 full weight premium auto on brembo wheels stock tires. BAMA 93 race tune only. DA +100

I run an AED tune now but I have done a lot of other stuff since then.
 

Red Turtle

ALWAYS WATCHING
Super Moderator
Joined
May 23, 2004
Messages
12,693
Location
Florida
I went a best of 12.21 @ 116mph with a procal/gt500 axleback. This was on my Nitto INVO's cutting a 1.8 60' time, and shifting into 5th.

I ran handfuls of .30's with the same set up of 114-115, so this was obviously my glory run.

Timeslip1-3-14_zps747faef2.jpg
 

Users who are viewing this thread



Top