Those with JLT RAI and JLT PCV pre filters, I need help

[Fordman9870]

I have the RAI and 2 JLT pre filters installed but on the passenger side the supplied 90 degree elbow that comes out of the pre filter makes it impossible to run the hose to the intake tube inlet. The supplied instructions show the stock set up.
I went to Lowes and got a straight one instead, coming out of the pre filter but it doesn't look real good and the hose kinks a little.
I have rotated the intake tube to many different positions but I still has a kink.
What have you done to remedy this and make it look good? Pics?

If you cant answer who is the best person to talk to at JLT?
Thanks.

 

[timspony]

Jay is the man at JLT....hope these pics help

 

[Fordman9870]

Thanks, That is what i was looking for. I take it that you used the supplied elbows? what about the rubber hose

 

[tcterminator]

 

[timspony]

Thanks, That is what i was looking for. I take it that you used the supplied elbows? what about the rubber hose

I did NOT use the supplied elbows....on the passangers side I made the stock hose work! :beer:

 

[Fordman9870]

Thanks Tim and TC for the images and info

 

[Jomo1994z71]

This has been discussed numerous times. I can't believe this is still going on with JLT, the little vacuum hose supplied was/is too short for the install for me. I had to run down to the store to get a longer line, which I thought was pretty ridiculous since i paid $100+ for the kit

 

[Fordman9870]

I agree 100%