After reading through several build threads where other readers always ask about belt size/pulley setups, seeing threads started asking for help on the issue, and spending time using the search function and trying multiple belts for my own build, I decided to start a thread dedicated to blower/pulley/belt combination's. If we get enough contributions, they might make it a sticky for us.
Rules are simple:
1) Post your information in the following format to make scanning or searching easier:
2) Try not to clutter the thread with off topic discussions, but requests ARE allowed, as I will try to maintain the thread by copying subsequent posts into the first post so people don't have to hunt.
3) All blower setups from eaton to whipple/kb to lysholm etc... are allowed
4) Terminators only!
I'll go first:
EATON:
post up!
WHIPPLE:
KENNE BELL
post up!
Hopes this helps!
Rules are simple:
1) Post your information in the following format to make scanning or searching easier:
Blower (be specific)
Pulley Set Up
Belt Size in total circumference
Brand/Part Number
Pulley Set Up
Belt Size in total circumference
Brand/Part Number
2) Try not to clutter the thread with off topic discussions, but requests ARE allowed, as I will try to maintain the thread by copying subsequent posts into the first post so people don't have to hunt.
3) All blower setups from eaton to whipple/kb to lysholm etc... are allowed
4) Terminators only!
I'll go first:
EATON:
post up!
WHIPPLE:
Whipple 2.9L Gen 2
Stock Idlers, stock 3.5" upper, 90mm motoblue aux tensioner
77"
Gates K080765
Stock Idlers, stock 3.5" upper, 90mm motoblue aux tensioner
77"
Gates K080765
KENNE BELL
post up!
Hopes this helps!
op:
