Thus far I have had a really good relationship with ZL1 Addons as a sponsor. Been very happy with their products, and my dealings with the owner John. Recently they were the solution to another "problem."
Almost all of us have to deal with the delimma of the front license plate. Some hate it all together, but given my personalized plate I would rather have it visible. I had Craigs custom bracket on my first GT350 and it worked fine. The mounting bracket for that setup attaches with 3M double sided tape. This time around I had my car ceramic coated before I installed the base, and sure enough it lost its bond after a while. The ceramic coating is doing its job, so no discredit to Craig.
ZL1 Addons has a front license plate bracket that screws into the tow hook mount, but I enjoy having the titanium hook on all the time. I figured that there had to be a mounting bracket ZL1 could make that would allow me to put another tow hook bracket on the passenger side for just the plate. Sure enough, I called John and he had one in stock. Apparently Shelby American had requested some custom made pieces for the passenger side, and John had one laying around. 2 days later I had the bracket and got it installed. Now I can run both the plate and hook without issue. Also should I ever have a nightmare scenario that I cant get the car pulled from the driver side, the passenger side is now an option too.
In any case, here are some photos I took if it installed. Car is dirty and the weather was gloomy, but this car is not going to be a garage queen. Enjoy, and call ZL1 Addons direct if you want the passenger side bracket.
Almost all of us have to deal with the delimma of the front license plate. Some hate it all together, but given my personalized plate I would rather have it visible. I had Craigs custom bracket on my first GT350 and it worked fine. The mounting bracket for that setup attaches with 3M double sided tape. This time around I had my car ceramic coated before I installed the base, and sure enough it lost its bond after a while. The ceramic coating is doing its job, so no discredit to Craig.
ZL1 Addons has a front license plate bracket that screws into the tow hook mount, but I enjoy having the titanium hook on all the time. I figured that there had to be a mounting bracket ZL1 could make that would allow me to put another tow hook bracket on the passenger side for just the plate. Sure enough, I called John and he had one in stock. Apparently Shelby American had requested some custom made pieces for the passenger side, and John had one laying around. 2 days later I had the bracket and got it installed. Now I can run both the plate and hook without issue. Also should I ever have a nightmare scenario that I cant get the car pulled from the driver side, the passenger side is now an option too.
In any case, here are some photos I took if it installed. Car is dirty and the weather was gloomy, but this car is not going to be a garage queen. Enjoy, and call ZL1 Addons direct if you want the passenger side bracket.