Any weed under there?
Hahahaha nope just a lot of coupons for taco hell and Burger King
Sent from my iPhone using the svtperformance.com mobile app
Any weed under there?
Those seats will look great. What was wrong with the OEM fuel door?
Wtf... what kind of crackhead steals a fuel door...
Happy New Years guys... ending the year taking out the rear seats this morning and getting rear seat delete by end of January. This old mystic really has been mistreated smh
Also might get the front 05-10 seats in since I have a couple days off. Will keep you updated View attachment 1454687
Sent from my iPhone using the svtperformance.com mobile app
Looks like someone left you the tools needed to remove the factory ford radio. That was nice of them!
Sent from my iPhone using Tapatalk
Can't believe someone stole the fuel door.
I thought I had a spare, but just checked and nope. Like Tab said, gotta be a crackhead or other junkie. They unscrewed and everything? No damage to the car? Man that is just screwy.
How does the black of the 2007 seats match the interior?
I did the install using an 04 console, you'll have to slightly trim the two little ridges on the underside of the switch to get it to sit flush with the console. If I remember correctly, I used the 97 harness but tapped into the cig lighter port wires to power the extra power socket in the console compartment. If you plan on using the new boot,all I did was remove the lower portion of the OEM handle trim from the ebrake lever and slid the boot over when I installed the console. If you want to dye the console black, I can give you the part numbers of the SEM system I used. It matches the factory 97 black interior perfectly, and has held up great.Recently purchased a 03 center console for the beast. What did everyone do about the fog light switch. I took off the coin slot from the new console but what about the harness. Is there a write up.
Also how did you guys install the new console with the ebrake boot ?
Sent from my iPhone using svtperformance.com
I did the install using an 04 console, you'll have to slightly trim the two little ridges on the underside of the switch to get it to sit flush with the console. If I remember correctly, I used the 97 harness but tapped into the cig lighter port wires to power the extra power socket in the console compartment. If you plan on using the new boot,all I did was remove the lower portion of the OEM handle trim from the ebrake lever and slid the boot over when I installed the console. If you want to dye the console black, I can give you the part numbers of the SEM system I used. It matches the factory 97 black interior perfectly, and has held up great.
https://www.semproducts.com/product/color-coattm-aerosols/15013