HEHEHE... Stage 69... HEHEHEHE
Anywhooooooo...
So Ive been tracking Costs and looking at the various packages from the big tuners to see what type of savings/waste Ive accumulated doing this Build.
So far, the mods are as follows: Mod, Price, Shop
(FYI, BLOWER IS STOCK AT THIS TIME. NOT PORTED)
ZPE 2.6 Upper Pulley 271.15 Beefcake
JLT Intake 399.99 (came with car)
VMP Billet high flow water Manifold 399.99 VMP
LTH Res Delete 399.99 (came with car)
ID1300 injectors 1800.00 Elite Performance Colorado
Kong 108MM TB 775.00 Bought from forum.
VMP Throttle Body adapter 99.99 VMP
VMP Apex Predator Lid 899.99 Lethal Performance
VMP Apex Street Intercooler Core 999.99 Lethal Performance
170oF Thermostat 74.99 Beefcake Racing
NGK 650 Plugs Gapped to .027 66.32 Summit Racing
SPE Aux adjustable Idler 219.00 Beefcake Racing
Belt 79 Beefcake Racing
Kooks Long Tube Headers+ Midpipe 1336.02 Lethal Performance
Tune 650 Palm Beach Dyno
HP Tuners MPVI3+ 8 Credits 799.91 HP Tuners.
Preheaders, this package made 797RWHP/644TQ in the hot ass Southern Florida Summer at PBD's Shop in Boynton FL back in mid June.
Total Cost Parts: 9340.33
Total Cost With Shipping and Taxes: 9738.41
Total Cost with Labor: 10,213.41 (950 for header install)
Similar package from PBD:
(This includes Porting your Stock Blower with Jokers Performance.)
Jokerz Ported Factory Supercharger Upgrade (cores available)
2.7 SPE Pulley
SPE 170 Thermostat
Injector Dynamics ID1050x Fuel Injectors
105mm Throttle Body
Cold Air Intake
Upgraded Heat Exchanger
Upgraded Whipple Intercooler
Kooks Long Tube Headers with Green Cats
Palm Beach Dyno Billet Supercharger Lid
Palm Beach Dyno Custom Tune
Palm Beach Dyno HPT RTD Tuning Device
12,399.99 (Labor, Shipping and Taxes not included.)
Jokers port is gonna cost you roughly $1600.00 (Labor, Shipping and Taxes not included.)
So the total to compare these is gonna be around 10,940.33 vs 12,399.99
Difference in Price for PARTS ONLY: 1459.66.
VMP offers a package without touching the exhaust, water manifold or lid upgrade:
(This includes Porting your Stock Blower with Jokers Performance.)
This package includes:
7499.99 (Labor, Shipping and Taxes not included.)
Hopefully this breakdown gives guys looking to modify their 2020+ GT500 a little insight into what its going to cost to get you at different levels of performance.
TL;DR:
1. You can save yourself some cash if you piece the parts together rather than buying a package.
2. Porting a stock blower is probably gonna net you 100 wheel HP on this set up.
3. Do the work yourself, it's not that hard. (minus the headers... F that.)
4. You can save some time if you decide to go with one of these ready-made packages.
Anywhooooooo...
So Ive been tracking Costs and looking at the various packages from the big tuners to see what type of savings/waste Ive accumulated doing this Build.
So far, the mods are as follows: Mod, Price, Shop
(FYI, BLOWER IS STOCK AT THIS TIME. NOT PORTED)
ZPE 2.6 Upper Pulley 271.15 Beefcake
JLT Intake 399.99 (came with car)
VMP Billet high flow water Manifold 399.99 VMP
LTH Res Delete 399.99 (came with car)
ID1300 injectors 1800.00 Elite Performance Colorado
Kong 108MM TB 775.00 Bought from forum.
VMP Throttle Body adapter 99.99 VMP
VMP Apex Predator Lid 899.99 Lethal Performance
VMP Apex Street Intercooler Core 999.99 Lethal Performance
170oF Thermostat 74.99 Beefcake Racing
NGK 650 Plugs Gapped to .027 66.32 Summit Racing
SPE Aux adjustable Idler 219.00 Beefcake Racing
Belt 79 Beefcake Racing
Kooks Long Tube Headers+ Midpipe 1336.02 Lethal Performance
Tune 650 Palm Beach Dyno
HP Tuners MPVI3+ 8 Credits 799.91 HP Tuners.
Preheaders, this package made 797RWHP/644TQ in the hot ass Southern Florida Summer at PBD's Shop in Boynton FL back in mid June.
Total Cost Parts: 9340.33
Total Cost With Shipping and Taxes: 9738.41
Total Cost with Labor: 10,213.41 (950 for header install)
Similar package from PBD:
X900S-3 2020+ Shelby GT500 93 Octane Power Package -900 Horsepower
<div><div>The 2020+ Shelby GT500 is not only the most capable Mustang ever released from the factory, but it can also make far more power than a typical 5.0/5.2L on 91/93 Octane! Palm Beach Dyno bought a car specifically to develop these packages and ensure a trouble-free experience while...
www.pbdyno.com
Jokerz Ported Factory Supercharger Upgrade (cores available)
2.7 SPE Pulley
SPE 170 Thermostat
Injector Dynamics ID1050x Fuel Injectors
105mm Throttle Body
Cold Air Intake
Upgraded Heat Exchanger
Upgraded Whipple Intercooler
Kooks Long Tube Headers with Green Cats
Palm Beach Dyno Billet Supercharger Lid
Palm Beach Dyno Custom Tune
Palm Beach Dyno HPT RTD Tuning Device
12,399.99 (Labor, Shipping and Taxes not included.)
Jokers port is gonna cost you roughly $1600.00 (Labor, Shipping and Taxes not included.)
So the total to compare these is gonna be around 10,940.33 vs 12,399.99
Difference in Price for PARTS ONLY: 1459.66.
VMP offers a package without touching the exhaust, water manifold or lid upgrade:
VMP '20 GT500 Stage 4 Pack - Jokerz port, APEX CAI, VMP 105 TB , 2.85" pulley, hub, VMP 81 mm race core IC, ID1300x, HP RTD, and Custom Tuning
VMP 2020+ GT500 Stage 4 PackVMP's Stage 2 power pack for your new 20+ GT500 will keep you on the edge of your seat at all times!ECU Tuning is typically thought to be a complex and magical process in the aftermarket performance industry. It is said to require extensive amounts of time, research...
www.vmpperformance.com
This package includes:
- HP Tuner's RTD Interface + (8) HP Tuner's Credits
- Joker's Ported Supercharger
- Uses your supercharger as core
- VMP 81mm Race Core intercooler
- JLT cold air intake
- Injector Dynamics 1300 injectors
- VMP 105mm throttle body
- 2.85" Griptec supercharger pulley + hub
- Will need Griptec pulley tool
- K080702 Belt
- NGK 6510 Spark Plugs
- (1) tune file 93 octane w/ datalogging support
7499.99 (Labor, Shipping and Taxes not included.)
Hopefully this breakdown gives guys looking to modify their 2020+ GT500 a little insight into what its going to cost to get you at different levels of performance.
TL;DR:
1. You can save yourself some cash if you piece the parts together rather than buying a package.
2. Porting a stock blower is probably gonna net you 100 wheel HP on this set up.
3. Do the work yourself, it's not that hard. (minus the headers... F that.)
4. You can save some time if you decide to go with one of these ready-made packages.
Last edited: