Just wish I had a single blade throttle body probably could have made more
same here i have stock throttle body, but u made damn good numbers!
Ready to see that bad boy. How much boost you think youll see 24lbs?
Cant wait see some new numbers take videos :rolling:
Crusher Inlet? If not you will probably have the same issue me and others are having with boost drop. I have my car pulley'd for 23lbs, and it will make 23 until about 4500rpms, then drops to 20lbs and holds there. You should still be able to make over 700hp, but the non-Crusher inlet will prevent what could be EPIC!!!
FWIW I made 681/724 on 109 Unleaded......I'm still searching for the 700hp mark!!!
I'm having the same issue as we speak
How high of boost do people start seeing that problem? Anyway to fix it
its what my tuner is saying. my only problem with it is the car never had this problem until my radiator was switched out. i ran my high boost upper (2.5) for like 5 pulls on the dyno and did not have this problem making 21 psi of boost. then after the radiator went in it was doing it at 17 psi on my 2.75 pulley.Your problem is probably to much boost causing the heads to lift
Sent from my Kindle Fire using Tapatalk 2
You check the pump? Made pretty good tq what boost did you see?